TLC Engineering names five associates

TLC Engineering for Architecture's board of directors has announced five new associates.

08/22/2012


Five engineers have been named as associates by TLC Engineering for Architecture by the board of directors. Associates are selected based on their long-term potential as leaders in the firm and their continued individual contribution to the successful efforts of TLC.

Eric Bradford, PE, LEED AP BD+C, structural engineer in TLC's Cocoa office has over nine years experience in structural engineering and construction administration. Courtesy: TLC EngineeringEric Bradford, PE, LEED AP BD+C, structural engineer in TLC's Cocoa office has over nine years experience in structural engineering and construction administration with a diverse design portfolio of educational, recreational, institutional and other commercial structures. In addition, he is an experienced threshold inspector and has provided inspections for various educational and recreational facilities.

Bradford is a past President of the American Society of Civil Engineers (ASCE), Cape Canaveral Branch and Gainesville Branch and a LEED Accredited Professional with the U.S. Green Building Council (USGBC).

He graduated from the University of Florida with a Bachelor’s in Civil Engineering. 

Jeffrey Stash, LEED AP BD+C, senior plumbing and fire protection specialist in TLC's Fort Myers office has over 23 years of engineering experience. Courtesy: TLC EngineeringJeffrey Stash, LEED AP BD+C, senior plumbing and fire protection specialist in TLC's Fort Myers office has over 23 years of engineering experience and is fluent in the International Building Code with extensive knowledge of designing systems that utilize alternative energy sources, including PV panels and solar water heating systems.

He is an active member of the American Society of Plumbing Engineers (ASPE), a LEED Accredited Professional with the U.S. Green Building Council (USGBC) and an Accredited Professional with the American Rainwater Collection Systems Association (ARCSA). He is also a Florida Master Plumber.

Stash is a graduate of Northern Virginia College and Maryland Drafting Institute.

Jamil Aljasir, mechanical specialty designer in TLC's Tampa office, has over 11 years of engineering experience. Courtesy: TLC EngineeringJamil Aljasir, mechanical specialty designer in TLC's Tampa office, has over 11 years of engineering experience on a broad range of building types including aviation, education, office and governmental facilities.

He specializes in mechanical design services, load analysis, commissioning services and maintaining facilities in accordance with sustainable building standards.

Aljasir holds an Associates in Applied Science from the ITT Technical Institute.

Rania Girgis, Business Development Representative for TLC, focusing on the healthcare market, has five years of experience in marketing and business development in the architectural/engineering industry. Courtesy: TLC EngineeringRania Girgis, Business Development Representative for TLC, focusing on the healthcare market, has five years of experience in marketing and business development in the architectural/engineering industry.

She has a bachelor of science degree in education from the University of Central Florida.

She is on the Board of Directors of the Society for Marketing Professional Services (SMPS) Central Florida and a Leadership Associate for the Construction Owners Association of America (COAA).  

Tony Esposito, PE, LEED AP, Mechanical Project Engineer in TLC's Healthcare Division, has over 12 years engineering experience. Courtesy: TLC EngineeringTony Esposito, PE, LEED AP, Mechanical Project Engineer in TLC's Healthcare Division, has over 12 years engineering experience in the design of hospitals and other medical facilities.

He is an active member of the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) Central Florida chapter and a LEED Accredited Professional with the U.S. Green Building Council (USGBC).

Esposito holds a Bachelor of Science in Mechanical Engineering and a Master’s of Business Administration from the University of Central Florida and remains an active alumni at the University.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.