Top 5 Consulting-Specifying Engineer articles, Feb. 17-23, 2014

Were you out last week? Miss something? Here are Consulting-Specifying Engineer’s five most clicked articles from last week, Feb. 17-23, 2014, including articles about the MEP Giants Program, corrosion in electrical systems, laboratory ventilation systems, lighting control requirements, and VFD and motor strategies.

02/24/2014


1. Nominations open for MEP Giants Program

The MEP Giants program lists the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States. The in-depth analysis of these firms appears in the August issue and reveals what's going on in the industry and how it has changed over the past few years. Special emphasis is placed on commissioning firms in a separate report each October.

2. Avoiding corrosion in electrical systems

Properly specifying electrical products for highly corrosive environments will reduce overall long-term cost and risk of failure.

3. Designing laboratory ventilation systems

Proper ventilation in labs is required to promote and maintain safety and protection to life and property.

4. Lighting control requirements: What's current and what to expect

This article examines lighting control requirements in various codes and standards, commissioning these controls, and what engineers may expect in the future.

5. VFD, motor strategies for energy efficiency

A variable frequency drive (VFD) often is specified to save money by reducing energy consumption in pumps, fans, compressors, or any other motor loads that may be found in a typical building. These best practices will provide the engineer with information on how to specify a VFD to meet load conditions while achieving efficiency.

The list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, Feb. 17-23, 2014, for articles published within the last two months.

- Jessica DuBois-Maahs and Jordan Schultz, associate content managers, CFE Media, jdmaahs(at)cfemedia.com and jschultz(at)cfemedia.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.