Top 5 Consulting-Specifying Engineer articles, June 16-22
Articles about LED retrofit codes and standards, NFPA 99-2012 changes, arc reduction code requirements, the 2014 Electrical and Power Study, and arc flash protection techniques were Consulting-Specifying Engineer’s five most clicked articles from last week, June 16-22. Were you out last week? Miss something. You can catch up here.
Clients are asking lighting designers to help them save on energy costs. Replacing fluorescent, HID, or other lights with LEDs is in high demand.
NFPA 99: Health Care Facilities Code was completely overhauled and rewritten from the 2005 edition to the 2012 edition and was changed from a “standard” to a ”code.”
Arc flash incidents occur all too often and impact many lives. To address the problem in the industry, NEC 240.87 was developed to ensure arc flash safety in the electrical industry. Three industry experts weigh in through an extensive Q & A.
According to the data in this report, more engineers are researching new electrical and power systems and the challenges of incorporating energy efficient designs continue to climb. View seven key findings and access the full 2014 Electrical and Power Study.
A variety of arc flash mitigation systems and active arc flash resistant switchgear are available to boost protection against arc flash incident energy.
The list was developed using CFE Media's web analytics for stories viewed on csemag.com, June 16-22, for articles published within the last two months.
- Chris Vavra, content specialist, CFE Media, firstname.lastname@example.org.
- Events & Awards
- Magazine Archives
- Digital Reports
- Global SI Database
- Oil & Gas Engineering
- Survey Prize Winners
- CFE Edu