Top Consulting-Specifying Engineer Articles, March 2012

The most visited articles at www.csemag.com during March 2012 include changes in the NEC, how to save water in commercial buildings, LEED changes, analyzing the lifecycle of HVAC systems, and active high-speed switching mitigating arc flash.

04/03/2012


March 2012's leading Consulting-Specifying Engineer articles include:


Key Changes In The 2011 NEC

Kenneth Lovorn explains and highlights changes made to the NEC code in 2011 and how they affect engineers.

10 Ways to Save Water in Commercial Buildings

Mark Spigarelli outlines 10 ways engineers can save water across both mechanical and plumbing systems within commercial buildings. 

LEED 2012 Anticipated Changes

Edna Lorenz and James K. Vallort explain how performance accountability and design integration are key elements of the likely changes to the LEED standards for credits.

Figure 3: This photo of a healthcare facility switchgear rear cable compartment shows a close-up view of the phase run-back with the bus cover panel resting on the phase bus. Courtesy: Schneider ElectricActive High-Speed Switching Can Mitigate Arc Flash

Michael Divinnie and James Stacy write about how innovative solutions, operator training, and safe work practices are being used to address arcing-fault hazards in medium-voltage switchgear.

Analyze The Lifecycle Of HVAC Systems

Cole Roberts, Andrew Rhodes, and Alexander Hespe write about how performing a series of cost analyses when designing HVAC systems is an economically justifiable method for selecting the appropriate design solution.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.