Top Control Engineering articles, April 2011

Most visited articles at www.controleng.com during April 2011 included features about award-winning products, Stuxnet, controller selection, wireless, Kaizen, and PID simulation, among other articles.

05/09/2011


Most visited articles at www.controleng.com during April 2011 included articles about award-winning automation, control, and instrumentation products, Stuxnet video, controller selection, wireless advice, Kaizen help, and PID simulation, among other articles.

April 2011’s leading Control Engineering online stories included: 

2011 Engineers' Choice Awards, Control Engineering art- 2011 Engineers’ Choice Awards - Spotlight on Innovation - Cover story: Best automation, control, and instrumentation products in 30 categories.

- Video: The lingering effects of Stuxnet - Two cyber security experts discuss what we should learn from the Stuxnet experience, and how companies may want to change their thinking going forward.

- Cover Story: Balancing PLCs, PACs, IPCs - Do you need a PLC, PAC, or IPC for your next control application? Will programmable logic controllers (PLCs) evolve into programmable automation controllers (PACs) or industrial PCs (IPCs)? Whatever the name, get the best features and software for your control applications.

Michael Babb, Control Engineering, Control Engineering Europe editor- Michael Babb, long-time Control Engineering editor, dies - Michael P. Babb passed away April 6, 2011, after a short illness. Babb began his editorial career with Control Engineering in 1985. Babb was recognized globally for 26 years of writing and editing about automation and control systems. Leave a remembrance of Mike, if you'd like, using the link below.

Overcoming barriers to wireless adoption - ProSoft Technology- Overcoming Barriers to Wireless Adoption - Wireless is flexible, versatile, and can be cost effective; however, concerns with security, reliability, and capacity of wireless continue to prevent conservative end users from reaping its benefits. Are these concerns valid?

- Kaizen event: 7 important tips for more efficient manufacturing - Improving efficiency with a Kaizen event requires specific planning, a cross-functional team, operator involvement, and four other important attributes.

Figure 2: Old controller design with a maximum position error of more than four degrees (bottom) when trying to follow reference trajectory (top, red line—commanded load angle; yellow line—measured load angle) corresponding to new speed and acceleration targets. The performance specification is for the error to be less than one degree.- Rapid design, prototyping of PID controllers - Computer models can simulate processes, allowing you to design and refine PID controller action before it is implemented and deployed.

Among popular Control Engineering pages are:

- User login 

- Digital Edition 

- Register Form 

- Search 

- eGuides 

- Contact Us 

- PLCs and PACs channel http://www.controleng.com/new-products/plcs-and-pacs.html

- Magazine Archives 

- Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.