Turck offers Gen. 2 AS-interface (AS-i) safety gateways manufactured by Bihl+Wiedemann

The new gateways from Turck integrate AS-i safety monitors and slaves, allowing 2 Safety at Work networks and up to 16 release circuits to be monitored per gateway, with 1 power supply.

01/17/2010


Turck offers new Gen. 2 AS-interface (AS-i) safety gateways manufactured by Bihl+Wiedemann

Turck offers new Gen. 2 AS-interface (AS-i) safety gateways manufactured by Bihl+Wiedemann, integrating AS-i safety monitors and slaves and allowing two Safety at Work networks and up to 16 release circuits to be monitored through each gateway.

Turck offers new Gen. 2 AS-interface (AS-i) safety gateways manufactured by Bihl+Wiedemann. The new gateways integrate AS-i safety monitors and slaves, allowing two Safety at Work networks and up to 16 release circuits to be monitored through each gateway. Now, two independent AS-i networks can be powered by a single power supply, providing diagnostic data to the higher-level controller and eliminating costs associated with additional power supplies and gateways. Bihl+Wiedemann AS-i masters monitor duplicate address detection, ground faults, EMC levels, error counters, emergency stops and safety light barriers, among other devices. The safety products offer a choice of relay or electronic outputs with expanded programming that allows up to 256 functions, without increasing response time. Up to 31 Safety at Work networks can be easily linked together and initiated at once. The Gen. 2 gateways are available for EtherNet/IP, Modbus TCP, Profinet, Profibus-DP and EtherCAT, providing the user with detailed diagnostic data and system status through the display and host network. Each gateway includes a removable memory card that stores up to four ASIMON software programs, where basic characteristics may be added. Turck distributes the gateways in the U.S. www.turck.us
Also read from Control Engineering :
- Bihl+Wiedemann adds functions to AS-i Analyzer ;

- Feature article: Safety via Fieldbus-Hanging by a Wire?
- Safety Sensors Rise to New Heights .

- Edited by Mark T. Hoske, editor in chief, Control Engineering www.controleng.com.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.