Twilight of nuclear power?

The Economist is characterizing it as “the dream that failed.” Is that too harsh a judgment?

03/15/2012


This week, which began with the first anniversary of the earthquake/tsunami in Japan and resulting nuclear plant melt-downs, The Economist is running a very interesting special section on nuclear power under the banner, “the dream that failed.” While it’s well worth reading in its entirety, the section suggests that nuke plants will continue to run (with exceptions such as Japan and Germany), but few new ones will be built (with exceptions such as China).

This decline will be related to cost and politics more than safety. Ultimately one of the things that will reduce its practicality is the fact that it is so huge and expensive. While it might be possible to build a wind turbine with an untried design, or even a coal-fired plant with an experimental super-duper-ultra-critical boiler, such an experimental approach is simply not practical for a nuke plant. There is so much money at stake, anything that gets built has to work and make back the cost. This makes technical innovation very slow. Current estimates suggest that a nuclear plant costs five- to 10-times the equivalent generating capacity using combined-cycle gas turbines. Who is going to build a new plant in the U.S. with that kind of cost? Can a utility justify $9,000 per kW for a new plant? Would you loan money to a utility so it could launch a nuke plant project?

Compared to the rest of the world, China is going crazy with new construction. But even at their break-neck pace, by 2020 less than 5% of domestic generation will be nuclear. Let’s hope the builders learned from the companies that built substandard schools that pancaked during the earthquakes in Sichuan. Countries that do not have fully transparent permitting and inspection mechanisms (which applies to Japan as we learned after the tsunami), aren’t the greatest candidates for expanding nuclear construction, but that doesn’t seem to be stopping China.

Ultimately the arguments come down to one point: nuclear power is good for reliable base-loaded generation free of global warming consequences. It is really the only technology that can make that statement, which makes it difficult to dismiss entirely. The possibilities of renewables are limited. When we reach the end of that approach, we will still have to look at fossil fuels or nuclear. It will take a hefty carbon tax on fossil fuels and cheaper nuclear plants to close the huge cost gap. All energy will be more expensive as a result, and maybe it should be.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.