Two-wire pressure transmitter for industrial field service

The Marsh Bellofram BelGAS Type 5000 P/I transducer is a two-wire device that uses a unique temperature-compensated transducer suitable for gauge pressure measurement of non-corrosive liquids and gases.

02/10/2014


The Marsh Bellofram BelGAS Type 5000 P/I transducer is a two-wire device that uses a unique temperature-compensated transducer suitable for gauge pressure measurement of non-corrosive liquids and gases. Courtesy: Marsh BelloframThe Marsh Bellofram BelGAS Type 5000 P/I transducer is a two-wire device that converts a signal pressure input into a precise 4-20 mA or 10-50 mA output. The Type 5000 pressure transmitter uses a unique temperature-compensated piezoresistive transducer suitable for gauge pressure measurement of non-corrosive liquids and gases.

Available in six pressure measurement ranges from 0-15 psig (0-1.0 bar) to 0-100 psig (0-6.9 bar), the transducer features an excellent dynamic response, typical accuracy of ±0.1% of span, and is relatively insensitive to mounting orientation and ordinary industrial vibration. The Type 5000 can withstand overpressures to 45 psig without calibration shift and overpressures to 60 psig without failure and its operating temperature range is from -40°C to 82°C.

The Type 5000 P/I transducer is designed for industrial field service in oil and gas, chemical processing, pharmaceutical, industrial automation, and power generation applications.

Marsh Bellofram Corporation

www.marshbellofram.com 

- See more Control Engineering process sensor and actuator products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.