U.S. Department of Energy deploys virtual reality training solution

SimSci-Esscor platform from Invensys Operations Management helps train clean-coal power plant operators.


SimSci-Esscor platform from Invensys Operations Management helps train clean-coal power plant operators.Invensys Operations Management, a global provider of manufacturing technology systems, software solutions, and consulting services announced that it has implemented a unique operator training simulator for the U.S. Department of Energy (DOE) using Invensys Operations Management’s SimSci-Esscor EYESIM virtual reality training solution.

Designed for use within integrated gasification combined cycle (IGCC) power plants with carbon capture, and implemented at the National Energy Technology Laboratory’s (NETL) Advanced Virtual Energy Simulation Training and Research (AVESTAR) Center in Morgantown, W.Va., the EYESIM solution uses 3-D virtual reality simulation to help train power plant control room and field operators. The company says that IGCC field operators wear a stereoscopic headset which immerses them in a virtual environment with the ability to move throughout the plant, coordinating their activities with control room operators, and interacting as if they were in the actual facility.

The EYESIM solution is also fully integrated with plant operating models, built on Invensys Operations Management’s SimSci-Esscor DYNSIM dynamic simulation software, so actions taken by a field operator affect the plant’s process, and actions performed in the control room change the information visible to the field operator. Fully interactive animations respond and react to the actions of plant personnel, illustrating how various pieces of equipment will operate under almost any scenario and condition. As a result, field and control room operators learn to collaborate and perform as a team.

“Training IGCC operators require us to simulate the chemical process of coal-gasification with CO2 capture together with combined-cycle power generation,” said Stephen E. Zitney, PhD, director of NETL's AVESTAR Center. “No one has ever done that before, but now with help from Invensys, we can simulate almost any operating scenario, including disturbances, malfunctions, and emergency shutdowns. We can even train operators on different coal and biomass feed stocks. The developments we’ve accomplished and the technology we’ve installed at the AVESTAR Center show the growing viability of IGCC power plants and indicate the growing demand for a well-trained work force. We look forward to working with Invensys as we train and enable the clean-coal operators of the future.”

The U.S. Energy Information Administration estimates that the U.S. has enough coal to last more than 200 years, but plants that continue to use conventional fossil fuel technologies will emit unacceptable levels of CO2 and other pollutants. IGCC with carbon capture offers an environmentally friendly alternative by capturing 90% of the CO2 produced by traditional fossil-fuel burning processes while at the same time reducing sulfur, mercury, and other NOx emissions. The IGCC process is more environmentally friendly than other coal-burning processes, but it is also extremely complex and requires skillfully trained personnel to operate what is effectively both a chemical processing plant and a power plant.

“Our EYESIM immersive training system makes the theoretical and conceptual side of training more realistic and tangible by allowing operators and trainees to become familiar with the layout of the physical plant and how it will operate under almost any condition,” said Tobias Scheele, PhD, vice president, advanced applications, Invensys Operations Management. “The solution combines stereoscopic 360-degree views with collision effects, sounds, lighting, and weather conditions to give the plant operator a realistic walkthrough environment and simulated hands-on experience with the plant’s physical operation, helping plant personnel improve operations excellence.”

A separate EYESIM virtual reality training system will be installed and commissioned at West Virginia University in Morgantown for student education and simulator training as part of assigned course work. In addition to training and plant design functions, the NETL and its research and development partners, including Invensys, will use the simulator to showcase the feasibility of clean-coal technology as a means to support future electrical generation demand without emitting environmental pollutants or greenhouse gases. The formal site acceptance test was completed on July 16, 2012, after a complete plant start-up.




Edited by Peter Welander, pwelander@cfemedia.com

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Choosing controllers: PLCs, PACs, IPCs, DCS? What's best for your application?; Wireless trends; Design, integration; Manufacturing Day; Product Exclusive
Variable speed drives: Smooth, efficient, electrically quite motion control; Process control upgrades; Mobile intelligence; Product finalists: Vote now; Product Exclusives
Machine design tips: Pneumatic or electric; Software upgrades; Ethernet advantages; Additive manufacturing; Engineering Leaders; Product exclusives: PLC, HMI, IO
This article collection contains the 5 most referenced articles on improving the use of PID.
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security