U.S. droughts create increase benefits of condensate recovery

For commercial and industrial facilities the benefits of condensate recovery can be measured in several ways: energy reductions, increased operational efficiency, chemical treatment cost savings, water conservation and emission control.

10/22/2013


This year the U.S. has seen a continuation of low rainfall and high temperatures, resulting in droughts across the country. Rain deficits have placed huge swaths of area across the country at risk of wild fires and agricultural output is being reduced significantly. Corn and soybean production has been reduced, affecting cattle feed and consumer prices. Cattle farmers and agricultural producers are short of water and residential consumers are asked to conserve. Industrial and commercial facilities are no different.

Should we expect to see these intense droughts and increased water rates in the future? Since 2010 the cost of water has increased by 18% in 30 major U.S. cities. The cost of water across the U.S. is increasing and water conservation is expected to be an important factor for years to come.

For commercial and industrial facilities the benefits of condensate recovery can be measured in several ways: energy reductions, increased operational efficiency, chemical treatment cost savings, water conservation and emission control. Steam, produced from chemically treated water, releases its heat energy on contact with a surface. This steam condenses back to water and still contains around 25% of its usable energy from the original unit of steam produced. Returning this hot condensate to the boiler leaves the boiler with less newly supplied energy to convert the water back to steam. This returned condensate can amount to huge fuel savings and emission control. Condensate recovery therefore saves energy by recycling heat energy, reducing the quantity of fuel and chemical treatments required to introduce and treat new boiler water.

Several different technologies exist to aid and control condensate recovery. The appropriately sized and selected steam trap removes condensate from a steam system while intelligently preventing the escape of live steam. There are many different types of steam trap, float and thermostatic, thermodynamic and balanced pressure, to name a few. The trapped condensate should be collected and pumped back to the boiler house feed tank. Mechanical steam driven pressure powered pumps automatically pump condensate as it is received. Pressure powered pumps maintain condensate temperatures as high as possible capturing the total available energy. Utilizing electrically actuated condensate return pumps are also a possible alternative. Flash steam recovery not only removes obvious steam plumes from facilities but also recaptures unused energy and reuses this energy in low pressure applications for pre-heating feed water or low pressure steam mains. In both instances the steam is being recycled for secondary purposes increasing the steam systems energy efficiency and reducing the quantity of steam produced by the boiler house.

Energy and chemical costs alone can justify condensate recovery projects, however adding ever increasing water costs can reduce payback periods significantly. Recovering and returning condensate will reduce water consumption. In times of drought when water is a scarce commodity, conservation through condensate recovery can move a business one step closer to self-sufficiency and will help a business become more sustainable and efficient.

Neil Davies is product marketing manager for Spirax Sarco. Content provided by Spirax Sarco, originally published in Steam News Magazine.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.