U.S. manufacturing vibrant, claims economist at CSIA conference

The 2009 Control System Integrator Association Annual Executive Conference highlights the end of an era and reports some of the first signs of a pending economic upturn. Long-time executive director Norm O’Leary says this would be his last conference as host; Lynda Patterson, president, and Robert Lowe, executive director (photo in story) will lead.

04/30/2009



Naples, FL– This year’s Control System Integrator Association’s (CSIA) conference here began with an end. Long-time executive director Norm O’Leary officially announced that this would be his last conference as host.

Robert Lowe
Robert Lowe (photo, left; also president of Loman Control Systems ) replaces O'Leary as executive director, in addition to Lynda Patterson, who now serves in the recently created position of CSIA President.Lynda Patterson, CSIA president

Click here to read more about this change.


Overall attendance at this year’s meeting is flat compared to last year, following a continual rate of increase over the previous 15-year history of the organization’s annual conference. A flat level of attendance in difficult economic times, however, is major feat. O’Leary pointed out that other, similar-sized conferences—such as MESA —have cancelled events for this year.

Economist Alan Beaulieu of the Institute for Trend Research

As it has for the last two years, CSIA launched this year’s conference with a report from economist Alan Beaulieu of the Institute for Trend Research . Beaulieu correctly called the current recession—both in timing and severity—at least year’s conference to a somewhat stunned audience that had some difficulty digesting how tough the economic times into which we were headed would be.

Since his economic predictions have been so accurate, here’s a summary of what he had to say at this year’s conference:

  • Though industrial production remains at its lowest level in 30 years, we have not hit bottom yet. “The rate of decline is easing,” says Beaulieu, “but inventories are still higher than incoming orders. We remain six to eight months away from recovery. And that recovery will be mild. 2011, however, will be a good year economically.”

  • Despite the current deep recession, Beaulieu points out that the U.S. remains the world’s manufacturing powerhouse—outpacing China’s production capability by 2:1. The U.S. is also still the world’s leading exporter, ahead of Germany, China, Japan, and U.K. “Manufacturing in the U.S. is not dying,” he says. “We’re just doing more with less. Production is down now, but that is compared to the past few years when we saw the highest levels of production in the U.S. since World War II. We’re vibrant.”

  • Three of the eight indicators the Institute for Trend Research follows are showing positive signs. When five of those are positive, the Institute will consider a recovery to be underway. The three showing positive signs are: money supply is increasing; bond prices are rising; and the ISM Index, though still in contraction, has been gaining for 3 months straight.

  • In particular, Beaulieu predicts good growth for the food and beverage and medical device industries. He also predicts a rise in commodity prices over the next year or two, especially copper and oil, as economic pressures build with a revitalized economy. He also recommends investment in cement, steel, and construction machinery manufacturers, as they will be near-term beneficiaries of government infrastructure spending.

- CSIA offers more resources .

- Control Engineering covers system integration , provides the Automation Integrator Guide .

David Greenfield , editorial director

Control Engineering News Desk

Register here





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.