Using 3D to deliver a new view of manufacturing

Chrysler expands use of technology to help deliver products faster, better.

08/07/2012


Chrysler Group LLC is using the world of 3D to change the way it looks at planning for future products and implements World Class Manufacturing (WCM) before a single machine is built or installed.

During a speech at the Management Briefing Seminars in Traverse City, Mich., on Aug. 6, 2012, Chrysler Group vice president Brian Harlow said that the company has brought 3D into its upfront processes in order to prepare for the launch of two important new transmissions in Kokomo, Ind., – the eight-speed rear-wheel drive and nine-speed front-wheel drive – as well as other new powertrain programs.

"We knew we needed a new way of working in order to get our plants in Kokomo ready at an accelerated pace," said Harlow. "By using 3D technology, we are in effect injecting the principles of WCM from the very beginning of our planning for production startups such as the ones in Kokomo."

The goal of WCM is to continuously improve performance in order to reach the objective of zero waste, which includes zero accidents, zero breakdowns, zero waste of motion and zero inventories.

Chrysler Group is utilizing a three-dimensional modeling system specifically for powertrain manufacturing to help everyone see the shop floor as it really is and not how one might imagine it is.

"We live in three dimensions, not two, so with a two dimensional drawing, you had to imagine the third dimension," said Harlow. "Engineers have good imaginations, but those imaginations don't all work the same way. If you have 10 engineers looking at a 2D drawing, they will all see it a little differently."

By turning the view, Harlow said that engineers can see the manufacturing environment, including equipment, materials and operators, as it really is. In this way, issues that may delay a program or cost money to fix are addressed even before the first piece of equipment arrives at the plant.

"Three-dimensional modeling allows us to make our actual investments as late as possible in the launch process," said Harlow. "The goal is to make the launch process as vertical as possible because this shortens the time it takes to recover our investment."

The software also has the capability of showing an exploded view of a machine. By de-contenting the machine, an operator can see all of the nuts and bolts, making it easier to understand how it goes together, maintain and repair.

"Animation is another critical aspect of the 3D programming," said Harlow. "It allows us to validate cycle times and to discover system-related issues even before the machinery is made.

"If there is a situation anywhere that compromises production, we can identify it up front in the process, something we ordinarily wouldn't know until the first day of production," continued Harlow. "Now we can be proactive. We can change cycle times by moving content or by making changes with the machine tool builder."



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.