Verifying the value of Lean Six Sigma programs

To achieve and maintain a competitive position in today's turbulent economy, companies are pursuing a variety of different business improvement initiatives. As long as the enterprise is pursuing continuous improvement, does it really matter which of the various methodologies, ideologies or programs are followed? The short answer is a resounding, “Yes.

11/01/2009


To achieve and maintain a competitive position in today's turbulent economy, companies are pursuing a variety of different business improvement initiatives. As long as the enterprise is pursuing continuous improvement, does it really matter which of the various methodologies, ideologies or programs are followed?

The short answer is a resounding, “Yes.”

Aberdeen's 2009 survey of more than 600 business executives finds that those following the true rigors of Lean Six Sigma are better equipped to improve operational performance.

Lean Six Sigma is indeed a tough and demanding program, but when followed with the intended rigor and attention to its finer points, it yields demonstrable results that can be measured in millions of dollars and double digit improvements in profits, quality, and cycle times.

Other continuous improvement and operational excellence programs simply do not produce the same results.

Names aside, it is the true rigor of a Six Sigma program that seems to make the biggest difference.

For those who indicated in the survey that they had Six Sigma programs in place, we asked several other questions to further qualify them, and defined a category we call “True Six Sigma.”

Only 43 percent of those with Six Sigma programs in place qualified for the label “True Six Sigma.” But those that did were far more likely to outperform their peers.

Although we collected data on the average financial result from individual projects, as well as the total financial gains from the start of the initiative, we chose the financial results achieved in the first two years to drive our Best-in-Class criteria. By doing this, we smooth out the difference between newer and very mature implementations.

During the first two years, most companies look for low-hanging fruit in order to produce some immediate and tangible results. Where costs and processes are wildly out of control, these early results can be enormous… and easily gained. For this reason, we temper these savings with the ability to drive those results to the bottom line and improve profits, quality and cycle times.

While we did not require the use of Lean Six Sigma as a criterion for the Best-in-Class, our results clearly show that these management strategies produce more business improvement— and preserving the rigor of Six Sigma produces even more consistent and dramatic results. While all those using Six Sigma and Lean Six Sigma were 1.4 times as likely to be top performers, those respondents that fell into the category of True Six Sigma were more than twice as likely to achieve Best-in-Class status.

By simply comparing the average financial results gained by the Best-in-Class and even the average True Six Sigma program, it's apparent that millions of dollars in savings can be produced.

Manufacturers that have previously confined Lean and Six Sigma efforts to the plant or shop floor should continue their journey to business improvement by bringing the same concepts to front and back office processes. Those in non-manufacturing industries that have yet to begin this journey are encouraged to take those first steps in the journey.

To obtain a copy of the full results of our benchmark visit: www.aberdeen.com/link/sponsor.asp

 


Author Information

oversees research and client development related to manufacturing at Boston-based AberdeenGroup, and has more than 30 years worth of ERP and supply chain-related experience. Cindy, a former director for a prominent enterprise vendor, has authored numerous white papers as well as a book titled, ERP Optimization.




No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.