Veterans can deliver skills to manufacturing

Manufacturers are starting to look to veterans and the skills they learned during their tours of duty as a way to shrink the Skills Gap.

12/09/2012


Last month’s launch of the Get Skills to Work program by the Manufacturing Institute and four major American manufacturers is to date the highest profile attempt by American manufacturing to bridge its ever-widening Skills Gap. Its stated goal is to link the hundreds of thousands of existing and projected American manufacturing jobs to the tide of military personnel returning from wars in Asia or from the end of their tours of duty.

The link between veterans and manufacturing is the key to the program, and so the first four companies to sign up—Alcoa, Boeing, GE and Lockheed Martin—fully understand the relationship between a strong military and a strong manufacturing environment. They also see the strong connection between the two, especially at this pivotal time in manufacturing. All have a long tradition in American manufacturing; all of them also are major defense contractors or suppliers.

There is an unquestioned need for skilled manufacturing workers, and enlisting military personnel is both a strong political and strategic move. Reaching out to reemploy veterans in the private sector after their service to their country was completed has long been a patriotic concept. More than at any time since World War II, Americans value the service of our military personnel, and this program is yet another attempt to recognize and honor that service.

“Manufacturing leaders need to deliver the same level of service to our returning veterans that they have delivered to us during their time in the military. We would have this obligation even if there were not a Skills Gap.”

American military personnel are trained on some of the world’s most sophisticated equipment. They understand discipline, commitment to hard work and an ability to apply critical thinking to solve problems. This skill set is exactly what many manufacturing employers want and need as they address a technological evolution in manufacturing. Plant managers need this kind of skill set to be able to remain competitive in a global manufacturing environment.

“Veterans offer the technical, leadership and critical thinking skills that advanced manufacturing demands,” said Paula Davis, president of the Alcoa Foundation, in a press release announcing the formation of the coalition. “Forming the Get Skills to Work coalition and coordinating with nonprofits to train, recruit and develop veterans is an exciting model that has the potential to change lives and produce a significant competitive advantage for U.S. manufacturers.”

The timing of this announcement comes as wars are winding down in Afghanistan and Iraq and military personnel will be returning to civilian life. Get Skills to Work estimates that one million veterans will leave the Armed Forces over the next four years, while 600,000 high-tech manufacturing jobs remain unfilled.

The return to civilian life from the military often is not easy. No one associated with the program underestimates that reality. We also can see the value of worker in our manufacturing ranks. For those who may struggle with what to do on their return from military service, Get Skills To Work offers a tangible direction and a clear path to the future. 

Manufacturing needs this influx of skilled talent. Manufacturing leaders need to deliver the same level of service to our returning veterans that they have delivered to us during their time in the military. We would have this obligation even if there were not a Skills Gap. The fact that one exists is all the more reason to get moving on this initiative today.

The roster of manufacturers involved in Get Skills to Work current stands at four. I expect that roster to grow rapidly. But even without the formal involvement in this program, manufacturers around the country can and should tap into this resource without delay.

Our soldiers are coming home, and a warm greeting and a parade is one way to welcome them home. But after the parade is over, let’s make sure we have a job training program and a job in manufacturing waiting for them. It’s good for manufacturing, it’s good for our veterans and that has to be good for America. 

“Manufacturing leaders need to deliver the same level of service to our returning veterans that they have delivered to us during their time in the military. We would have this obligation even if there were not a Skills Gap.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.