Video tutorial: Measuring liquid depth using pressure

If you want to measure the level of liquid in a tank, one of the simplest approaches is to use a pressure gage. The fact that liquid has weight means that you can measure that weight in the form of pressure. By drilling through the side of a tank and inserting a gage, a reading can be translated into the depth of liquid above the gage.

01/01/2010


If you want to measure the level of liquid in a tank, one of the simplest approaches is to use a pressure gage. The fact that liquid has weight means that you can measure that weight in the form of pressure.

By drilling through the side of a tank and inserting a gage, a reading can be translated into the depth of liquid above the gage.

If your gage is set up to read in inches of water column, the conversion is really easy. If it reads in PSI, one pound equals 2.307 feet of water, or 27.68 inches.

 

Control Engineering Senior Editor Peter Welander conducts liquid level measurement test in video at http://tinyurl.com/ye6e3yj.

Control Engineering Senior Editor Peter Welander conducts liquid level measurement test in video at tinyurl.com/ye6e3yj.

For all practical purposes, any unit of pressure can be converted to the required unit of depth. Most assume a liquid density equal to water, however there are conversion factors for liquids with other densities. If your tank is full of ethanol, one PSI equals about 3.00 feet of liquid since ethanol is less dense than water. If you want to be really precise, a temperature correction is required as well since density is affected by temperature.

Keep in mind that the gage is going to tell you what the depth is above itself. If it is mounted halfway up the side of a tank, that is its starting point. It can’t read anything lower. In the same way, if you put the gage on an impulse line (with no air in it), the position of the measuring device is still the relevant point. The position of the penetration into the tank doesn’t matter.

This type of application is very common given its simplicity, accuracy, and versatility:

  • You can use any type of pressure measuring device, electronic or mechanical;

  • It can be as precise as the process requires;

  • With the right type of device, you can interface with a control system, set alarm levels, etc., as needed; and

  • Once the device is permanently positioned, even if it isn’t at the bottom, you can compensate for most placement issues.

There are some practical limitations, including:

  • If there is sediment or debris in the liquid, it can clog impulse lines;

  • You have to add one or two more penetrations into the process; and

  • If a tank can hold multiple products, you have to use appropriate density corrections.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me