Water, wastewater SCADA projects benefit from U.S. stimulus funds

Municipalities plan to upgrade systems, while integrators and control system vendors anticipate new projects. Link to where the money goes, better economic news

05/01/2009


www.recovery.gov


See where the money goes:
- USA
- EPA

While a lot of the economy is in rough shape, it seems that water/wastewater utilities are holding their own thanks, in part, to U.S. stimulus funds aimed at infrastructure projects in various states. Municipalities are upgrading long neglected systems, and system integrators, machine builders and control system vendors are rolling up their sleeves to start new projects.

Those trends come as no surprise to Control Engineering blogger Stan Prutz , who is also CEO of system integrator QDS Systems. “After all,” he says, “people are still turning on the lights, using water and flushing their toilets.” QDS’s water/wastewater designs are located throughout the Southeastern U.S. and, in its Louisiana home market, QDS has installed and maintained more water and wastewater SCADA, control and instrumentation systems than any other provider in the state.

Prutz says, “Vendors we serve who are focused on these markets have remarked in recent visits how some of their big vendors, once aloof to them due to their relative size, have now placed them on center stage. New alliances are being formed by some in our industry, tending to remap customers’ allegiances for us all.”

A shifting of suppliers to water/wastewater utilities is coming at the same time money is beginning to flow again to some long-planned, often delayed projects. An unprecedented $4 billion dollars will be awarded by the Environmental Protection Agency to fund wastewater infrastructure projects across the country under the American Recovery and Reinvestment Act (ARRA). The money will be in the form of low interest loans, principal forgiveness and grants. At least 20 percent of the funds provided under the Act are required to be used for “green infrastructure, water and energy efficiency improvements and other environmentally innovative projects.”

At the annual meeting of the Control Systems Integrators’ Association (CSIA) last week, integrators specializing in various industries, including utilities and water/wastewater, discussed the economy and heard how investment in cement, steel, and construction machinery manufacturers may be near-term beneficiaries of government infrastructure spending.

The EPA awarded $430 million to the State of New York for wastewater infrastructure projects. The state will provide money to municipal and county governments and wastewater utilities for projects to protect lakes, ponds and streams. The money will be given to the New York State Department of Environmental Conservation and spent by the New York State Environmental Facilities Corporation.

The EPA awarded $19.5 million to the Kansas Department of Health and Environment to improve drinking water infrastructure across the state. The funds went to Kansas’ Drinking Water State Revolving Fund program. The state agency said it plans to supplement the $19.5 million with other funds from its Drinking Water State Revolving Fund, to fund 39 projects costing just over $53 million. Cities and counties across Kansas submitted 143 project proposals for funding consideration. Proposals were reviewed by department staff who made the selections based on readiness to proceed and the Drinking Water State Revolving Fund project priority ranking system.

Ohio EPA Director Chris Korleski announced intended project priority lists that include 69 drinking water projects in 52 communities and 255 water pollution control projects in 164 communities to be offered funding under the American Recovery and Reinvestment Act (ARRA). Ohio EPA has issued draft Intended Use Plans (IUPs) and will hold a public meeting to take comments on the plans on May 7 in Columbus. U.S. EPA will need to approve the IUP prior to funds being awarded. The state agency will make 100 percent of stimulus funds available as subsidies, which is more than the 50 percent required in the Recovery Act. Non-Recovery Act funds will also be "mixed and matched" with Recovery Act funds to increase the number of communities able to receive infrastructure funding.

The EPA awarded $49,878,100 to the Kentucky Infrastructure Authority to “finance many of the overdue improvements to wastewater projects that are essential to protecting public health and the environment across the state.” The funds will go to the state's Clean Water State Revolving Fund program, which provides low-interest loans for water quality protection projects for wastewater treatment, non-point source pollution control, and watershed and estuary management.

According to EPA, since the Clean Water State Revolving Fund program began in 1987, EPA has awarded more than $26 billion in grants, which states have turned into $69 billion of financial assistance for water quality projects. President Obama signed the American Recovery and Reinvestment Act of 2009 on February 17, 2009, and has directed that the Recovery Act be implemented with unprecedented transparency and accountability. To that end, the American people can see how every dollar is being invested at www.Recovery.gov

For information on EPA’s implementation of the American Recovery and Reinvestment Act of 2009 in EPA Region 4, visit www.epa.gov/region4/eparecovery

For more from Stan Prutz, visit his blog.

Several other independent sources give separate positive indications for manufacturers. See Economy: Indicators suggest growing manufacturer optimism

– Edited by Renee Robbins , senior editor
Control Engineering News Desk

Register here and scroll down to select your choice of eNewsletters free.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.