What process control applications are suitable for wireless?

When can a process application eliminate the cable and use open source radio technology? Gerrit Lohmann and Robert Schosker, product managers for Pepperl+Fuchs, Twinsburg, OH, say that use of wireless technologies will grow as options expand beyond proprietary wireless solutions, allowing easier integration and eliminating cable in certain situations, for process sensors, instrumentation, and p...

09/01/2008


When can a process application eliminate the cable and use open source radio technology?

Gerrit Lohmann and Robert Schosker, product managers for Pepperl+Fuchs, Twinsburg, OH, say that use of wireless technologies will grow as options expand beyond proprietary wireless solutions, allowing easier integration and eliminating cable in certain situations, for process sensors, instrumentation, and process monitoring.

They explain that wireless implementations should be considered for the following applications:

  • Level measurements in logistics companies previously undertaken manually, such as for storage of intermediate products, in which the wired solution is either not possible or uneconomical due to obstacles between the control room and the storage location.

  • Environment monitoring, such as corrosion measurement using online corrosion monitoring instruments at important measuring positions, while eliminating the wiring requirement.

  • Monitoring of operating elements actuated manually in the field, such as ball valves, to reduce or eliminate control sequences and to provide a better overview of the plant state.

  • Quality assurance through the cyclic measurement and direct transfer to a database (bypassing the control system) of quality-relevant parameters not relevant to the process control system.

  • Process optimization and fault tracing due to temporarily installed wireless measuring devices, which measure secondary process parameters.

  • Process control in plants, which are only installed and operated for short periods for the production of intermediate products. This saves the expense of wiring that would be required for each plant revision.

A WirelessHART Network offers transmission security through alternative and redundant transmission paths. Source: Pepperl+Fuchs.

A WirelessHART Network offers transmission security through alternative and redundant transmission paths. Source: Pepperl+Fuchs.

In these applications, wireless technology improves information on plant status, material flow, and process sequence. It provides a basis for sequence and process optimization, asset management, and decisions relating to preventive maintenance, thereby improving the economy of process plants.

Industrial wireless compatibility among field devices of various manufacturers was not available until the HART Communication Foundation’s WirelessHART standard was released in September 2007. It is based directly on the HART protocol, but is free of the physical transfer path. HART uses a 2.4 GHz band—license-free and used throughout the world—as a transfer medium for several radio technologies, including WLAN, Bluetooth, and ZigBee. For the physical layer, WirelessHART uses radio modules in accordance with IEEE 802.15.4. Radio systems already are established on the basis of this standard, such as ZigBee and WLAN. Hardware already is available.

www.pepperl-fuchs.com



Look closely at wireless if your operation fits any of the following scenarios:

Obstacles between the control room and storage location

Need to reduce or end control sequences

Provide a better overview of the plant state

Flexible reporting for short production runs



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.