Wind energy tax credit going away?

Industry experts predict new projects will slow or stall. Should subsidies continue?

02/17/2012


This morning the Chicago Tribune is reporting that the deal to renew tax credits for wind energy failed in Washington. There has been a tax credit amounting to 2.2¢ per kWh of electricity generated by wind turbines, but efforts to extend that are dead for the moment and probably won’t be resurrected until after the election, if at all. If I understand it correctly, the credit will continue for turbines that are operating now or in operation by the end of 2012, which means projects underway will need to be finished before then. It will be a very busy summer, but projects that are too far out could be scrubbed.

The article is particularly interesting in that it makes the point that new energy generating technologies take a long time to go mainstream and become self supporting, on the order of 15 to 30 years. There are historical precedents that most technologies have been subsidized to some extent in their respective day. If you go back far enough, say 1918, even the oil and gas industry started receiving major government support. Those subsidies continued well into the 1940’s, and if you convert everything to current dollars, at rates much higher than biofuels or renewables have received.

The energy technology that got the most by far is nuclear. That began in 1947 and peaked around 1960-61 when the industry received (in current dollars) more than $6 billion annually. Renewables, including wind, get about $1 billion today.

Projections suggest that if the tax credit stops, new capacity added in 2013 will drop to between 2,000 and 4,000 MW, down from 10,000 MW in 2012. Existing turbines will continue turning of course, but if new construction drops to that level there will be corresponding business closings, layoffs, etc. There are efforts in the works to extend the tax credit as its own legislation. If you want to see this pan out one way or another, now would be a good time to express your opinion to your relevant legislators.

Watch a video about wind turbine gearbox building.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.