Wind turbine at manufacturing plant has hydraulic tip-up tower

Wago Corporation installed a Renewegy VP-20 Wind Turbine capable of generating 20 kW for its Wisconsin headquarters. Hydraulics raise and lower the tower; Wago components are used.

09/21/2011


Tip-up wind turbines installed at Wago's Wisconsin headquarters generate 20 kW. Courtesy: WagoWago Corporation installed a Renewegy small-scale, commercial-grade VP-20 Wind Turbine at its Germantown, Wis., headquarters. Capable of generating 20 kW for Wago's engineering, manufacturing, and sales hub, the VP-20 installation also uses Wago 787 Series power supplies, 756 Series cables and connectors, 288 Series fuse blocks, and backup capacitor module. 

The 30-meter-tall turbine features a monopole tip-down tower with an innovative tip-up function, which essentially raises itself. This replaces large cranes and heavy-duty equipment for install/maintenance with the tip-up hydraulic cylinder system. Within 8-10 minutes, the tower and turbine are raised or lowered. Within just 25 minutes, the VP-20 at the Wago site was raised, spinning at 600+ rpm, and generating power.

Wago Corporation commissioned a Renewegy 20 kW VP-20 small-scale, commercial-grade wind turbine at its Germantown, Wis., headquarters; mock-up image shows position on left. Courtesy: Wago

Key to power generation for the VP-20 is Renewegy's segment-exclusive electronic Variable Pitch (VP) feature. Patterned after utility-scale turbines, VP controls pitch for each blade within 1/10th of a degree while pitching at speeds up to 15 degrees/sec. A closed-loop, Active Pitch Servo manages blade speeds in wind conditions ranging from 6.7-55.9 mph. An electric Active Yaw Servo ensures optimum power generation by directing the blades' direction into the wind.

Power supply and signaling reliability are essential for coping with widely varying wind conditions. Renewegy specified Wago's IP67-grade 756 Series cables and connectors for the VP-20's microprocessor-driven control system. The connections are designed to resist dust, water, and mechanical loosening caused by vibrations.

Anchoring the VP-20 is a control cabinet supported by Wago 288 Series Capacitor Back-Up Module and 787 Series Epsitron Pro 24 V dc power supplies. (These units were specified because they feature PowerBoost, which provides twice the current at constant voltage for approximately 4 sec for cold-weather start ups.)

www.renewegy.com

www.wago.us 

Wago Corporation

See a VP-20 video: http://www.renewegy.com/news.html

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.