Wireless adoption trends in factory automation

Wireless devices are perceived as the next big technological wave in factory automation. However, the current adoption trends are moderate at best, despite requirements for real time data, mobile workforce, remote access and flexibility in operation. This is mainly because wireless devices are not found to be robust enough by end users, according to Khadambari Shanbagaraman, a research analyst ...

02/01/2009


Wireless devices are perceived as the next big technological wave in factory automation. However, the current adoption trends are moderate at best, despite requirements for real time data, mobile workforce, remote access and flexibility in operation. This is mainly because wireless devices are not found to be robust enough by end users, according to Khadambari Shanbagaraman, a research analyst for Frost & Sullivan Industrial Automation & Process Control Group. Concerns include reliability, security and interoperability, and others.

End-users perceive that for a plant to operate round-the-clock, the current wireless technology does not provide the necessary robustness. This is due to many possible technical issues, such as signal mismatch, electromagnetic induction, data loss in transmission, and other interference problems, that are quite common in a factory automation environment, says Shanbagaraman.

In addition, data transmitted wirelessly can easily be hacked. Thus, it must be properly encrypted and decrypted for secured transmission. End user conservatism, which is evident in industries such as food and beverages and plastics, is also restraining investments into wireless devices, as end users are less willing to implement new technology without being assured of its potential benefits. Many end users indicate that they might jeopardize their current operations if they shift to this new technology. Other concerns hampering wireless device adoption include high initial investment cost, low battery life, interoperability, and non-uniform wireless standards.

Shanbagaraman suggests that wireless device vendors must take the first step in addressing these technical issues. Educating end-users about wireless products and their benefits will help in changing their conservative mindset. This will, in turn, help suppliers learn about end-user requirements, and help them offer wireless solutions best suited to those needs. Offering end users products for testing and trial would be another important step towards increasing wireless adoption.

www.frost.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.