Wireless Enables Huntsman Project Zero
One of the largest and most ambitious industrial wireless application networks to date helps chemical manufacturer Huntsman strive for zero product defects, zero safety incidents and injuries, zero environmental releases, and zero unscheduled downtime.
An aggressive manufacturing excellence program at Huntsman, manufacturer and marketer of differentiated chemicals, required “one of the largest and most ambitious industrial wireless application networks to date,” according to those involved. Wireless technologies are helping Huntsman in its goal of zero product defects, zero safety incidents and injuries, zero environmental releases, and zero unscheduled downtime.
John Prows, Huntsman’s vice president of manufacturing excellence, and his Port Neches team sought to design and implement a system that would deliver business value by improving safety, environmental performance, and processes at Port Neches, a four-square-mile chemical facility. Located in Southeast Texas about 100 miles outside of Houston, the site has more than 500 employees, 100 contractors, and 16 operating units.
Huntsman wanted a system to give personnel real-time access to information that they need to operate the plant as safely and efficiently as possible– no matter where they were.
“As operators make rounds and identify hazards, they should immediately address them,” says Kim Hoyt, director of manufacturing at Huntsman. “If something is operating outside of a safe range, they can immediately take action to prevent it from turning into a process incident. As the units perform more consistently and reliably, we expect the financial performance of that unit to improve as well. Ultimately, we expect safety incidents and environmental incidents to be completely eliminated.”
To help deliver on the objectives of Project Zero, Huntsman partnered with Industrial Mobility, Apprion, and Motorola. Industrial Mobility contributed its MobilOps field mobility software that enables field operators to execute electronic “smart” rounds and checklists, enter real-time defect elimination work requests in the field, monitor and control standard operating conditions (SOCs) for each piece of equipment, and access the most up to date standard operating procedures (SOPs) for execution in the field including consequences of deviation (CODs) and corrective actions (CAs).
One location for safety
Managing safety critical information in one place is more effective than building nested safety data into each round, checklist, or procedure, Huntsman suggested. The MobileOps solution contains an SOC database engine that provides safety critical data to operators and mechanics at the point of decision making in the field. Handheld field executable procedures, rounds and checklists pull safety critical data from the same source. Streams of legacy information (process and instrumentation diagrams, process flow diagrams, drawings, procedures, incident reports, etc.) also are available on demand in the field.
For the mobile platform to run MobilOps, as part of its Ion System, Apprion selected Motorola’s MC9090 rugged mobile computer. Using these, Huntsman personnel connect within the four-square mile plant via the Apprion Ion System–a Class 1, Div 2 rated wireless application network. Apprion’s Ion System provides wireless application deployment (applications include video, voice communications, energy efficiency and condition monitoring) and a central dashboard that integrates application data, wireless regional maps,and equipment status and maintenance views and reports.
At Huntsman, Apprion’s Ion system includes:
91 Class 1, Div 2 Apprion Ionizers (2200 Series) industrial wireless field appliances using IEEE 802.11g radios to communicate with
50 Motorola MC9090 handheld computers with radio frequency identification (RFID) readers;
An 802.16 WiMax radio network for backhauling data from isolated sections of the plant; and
Passive RFID tags placed on thousands of pieces of equipment for automatic identification during rounds.
Safety incidents fall 75%
As of October, Huntsman’s Mobility Solution is in three units at the four square mile Port Neches site. Initial results show significant improvements and indicate the goals of Project Zero will be achieved. With real-time wireless tracking of the rounds activity, the number of pumps requiring daily inspection has been reduced by 50%, allowing more time for other, more crucial inspection areas. Tracking work requests initiated in the field automatically identifies redundancies, makes work planning more effective and will lead to significant reduction in the average “time to closure” for each request. Real-time monitoring of SOCs has led to significant process improvements and cost savings due to increased uptime and longer equipment lifetime. Because all data points are captured electronically, new workers who replace retiring veterans have ample and accurate data for training.
Greater equipment reliability and process improvements by putting accurate and reliable SOCs into the hands of operational personnel;
75% decrease in safety incidents, with additional reduction expected. Driving safe operating data to the operators in the field ensures that the safest approach to each task is followed. Access to operating data will also ensure that steps are taken according to safe choices;
Increased effectiveness in defect capture and providing accountability at all levels of the organization, including operations and maintenance personnel, managers, and executives responsible for providing a safe and efficient work environment;
Reduced maintenance costs; and
Increased uptime from the improvement in overall equipment effectiveness that increases production quality and quantity.
Prows says, “The operator scans the RFID tag with the handheld, pulls down a defect pick list, and punches the enter button. It is that quick.”
Initial results suggest a strong return on investment with positive effect on Project Zero objectives, now underway at other facilities.
Read other articles in Wireless Communications for Industry , a supplement to the November 2009 Control Engineering print edition, which contains:
-Wireless Enables Huntsman Project Zero
-Wireless Technology as a Work in Progress
-Plant Deployment Demonstrates Wireless Standard
-Transparent Wireless at Cano Petroleum
Also see :
- Application close-up: Wireless devices support equipment monitoring ;
- Wireless networks: Adding cellular technology to the industrial toolbox ;
- How to stretch wireless I/O throughout manufacturing ; and
- Wireless I/O, module IWLAN, saves time, money .
|Search the online Automation Integrator Guide|
Case Study Database
Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.
These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.
Click here to visit the Case Study Database and upload your case study.