Wireless networking: Temperature sensing network simplifies FDA compliance

11/01/2006


Pharmaceutical companies have critical responsibilities for safe manufacturing processes for the sake of their customers and to comply with FDA regulations for monitoring and documenting production. When one company wanted to deploy a new temperature monitoring network on existing production lines, it chose wireless technology to simplify installation while reducing cost and downtime. System integrator GE Sensing selected Sensicast 's SensiNet products to provide centralized data collection which integrated with its existing software infrastructure.

The subject manufacturing lines are spread out over three buildings on the plant campus. Compliance with U.S. FDA 21 CFR Part 11 regulations required placing sensors at 130 locations, so adding cabling to all those would have been a major undertaking. However, using wireless technology, the individual sensors were installed over a period of several days, and since no data wiring had to be added, the work was done without interrupting production.

SensiNet uses mesh technology to provide a self-managing and self-healing network. Using a combination of sensors and mesh routers reportedly extends the range of sensors and supports reliable communication with the gateway. Once operating, mesh networks configure themselves for optimal performance.

'GE Sensing has been using Sensicast RF sensors primarily within pharmaceutical companies, where data connection and integrity must be at 100%,' says Jon Aldous, application engineering manager, pharmaceutical, medical, and foods division. 'The flexibility of sampling data from previously difficult environments—HVAC, mobile racks, and sealed chambers—is an obvious advantage over a wired solution. The formation of the RF network was created within minutes, and with a detailed performance utility provided by Sensicast, we were able to create a completely stable RF system within a few hours. Typical stainless steel environments create black spots for RF, but Sensicast's system has been performing for over 6 months without a glitch.'

The temperature sensor network fulfilled the customer's requirements and FDA compliance. Data from the monitoring points now flow into the control and logging software fully validated and documented.

Daily News Desk, Peter Welander ,
process industries editor , Control Engineering





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.