24 V dc power supplies, 0.75-40 A

Balluff has introduced a new line of power supplies designed to meet the needs of automation control suites. Ten models in the line include a wide range of 24 V dc units with single and three phase inputs.
By Control Engineering Staff April 22, 2009

Balluff introduced 24 V dc power supplies
Industrial automation systems need reliable power– power that is clean, spike-free, and controlled to provide the amount of voltage and amperage required by the system. Balluff has introduced a new line of power supplies designed to meet the needs of automation control suites. Ten models in the line include a wide range of 24 V dc units with single and three phase inputs.

With output current ranges from 0.75 A (18 W) to 40 A (960 W), there is a size for most applications. If more power is needed multiple power supplies can be connected in parallel for additional current capacity.

Company says other features include built-in advanced overload and overvoltage protection, load regulation to +/- 1%, ripple/noise less than 50 mV on most models, adjustable outputs to compensate for differences in specific control needs, all models are din rail mountable. Mean time between failures for all are over 210,000 hours / 24 years while operating at published specifications. www.balluff.com/PowerSupplies

Balluff