3-phase power measurement

Wago Corporation’s 750-493 3-Phase Power Measurement Module integrates comprehensive monitoring of a power supply network with the connectivity of an I/O system. At 12 mm wide, the high-density, 6-channel module provides cost and space savings. The 750-493 is a component of a remote I/O or distributed control system and is compatible with 16 different fieldbus networks (including Ethernet...
By Control Engineering Staff April 1, 2008


Wago Corporation’s 750-493 3-Phase Power Measurement Module integrates comprehensive monitoring of a power supply network with the connectivity of an I/O system. At 12 mm wide, the high-density, 6-channel module provides cost and space savings. The 750-493 is a component of a remote I/O or distributed control system and is compatible with 16 different fieldbus networks (including Ethernet, Profibus, Modbus, and DeviceNet) and the 300+ digital, analog, and special function modules found in the Wago-I/O-System, with the flexibility to analyze and distribute power supply data. When one or more modules are connected to a Wago controller, the solution can be programmed with Wago-I/O-Pro CAA for data logging, time stamping, and historical analysis. The 6-channel power measurement module has three channels dedicated to voltage input and three channels dedicated to current input. It is available in 1 A and 5 A variations to support standard current transformer signal levels. www.wago.us WAGO Corporation