Bus-based temperature controller

Gurnee, Ill. —The MLC9000 bus-based temperature controller uses DeviceNet, Profibus, Modbus, or serial communications to interface directly to PLC or HMI. Features include RaPID fuzzy logic, EasyTune, deterministic 100-msec sample time, built-in heater break alarms, single loop hot-swap, and building block approach to adding additional loops.

By Staff April 1, 2000

Gurnee, Ill. —The MLC9000 bus-based temperature controller uses DeviceNet, Profibus, Modbus, or serial communications to interface directly to PLC or HMI. Features include RaPID fuzzy logic, EasyTune, deterministic 100-msec sample time, built-in heater break alarms, single loop hot-swap, and building block approach to adding additional loops. www.mlc9000.com Danaher Controls