Contact amplifier for automation and industrial process control applications

Mantracourt's LCD20 load cell DIN rail signal amplifier has standard analog outputs of 4 to 20mA and 0 to 10 V with two digital inputs and has a specification to match most load cells, pressure or strain gauges.
By Mantracourt June 19, 2016

Mantracourt's LCD20 load cell DIN rail signal amplifier has standard analog outputs of 4 to 20mA and 0 to 10 V with two digital inputs and has a specification to match most load cells, pressure or strain gauges. Courtesy: MantracourtMantracourt’s LCD20 load cell DIN rail signal amplifier specifically designed for automation and industrial process control. The LCD20 has standard analog outputs of 4 to 20mA and 0 to 10 V with two digital inputs and has a specification to match most load cells, pressure, or strain gauges. Two set point relays allow users to set individual thresholds, so providing controls and alarms without the cost of additional instrumentation. Superior accuracy is assured through 10 point linearization to desired engineering units. The LCD20 is also designed to support 6-wire input to compensate for any barrier or cable losses. The LCD20 can be set up through either a PC or a digital handheld programmer. Configurations can then be saved to a file that can be sent to end users via email in the event of loss or outage. For added security, lockable features can prevent accidental or malicious end-user changes to the configuration.

www.mantracourt.com 

– Edited by CFE Media. See more Control Engineering I/O module and system products.