D3 dryve by Igus
Igus’ D3 dryve is designed to control linear and rotary systems completely without software or a personal computer.
Igus’ D3 dryve is designed to control linear and rotary systems completely without software or a personal computer. The D3 control system is suitable for all standard dc motors. It connects to a 24 V power supply. End users can set parameters on operating mode, end position switch off, acceleration, and the motor via the DiP switch. The speed can be adjusted with an onboard potentiometer. The current limiting is done on the controller. After a few simple steps, the control system can be put into operation. A LED display indicates the current status of the control system to the user with several colors. The D3 dryve control system can also be used when the user wants to set up basic motion profile for height adjustments, sliding doors, and many other positioning tasks.
View this product in CFE Media’s New Products for Engineers Database.
Original content can be found at gspplatform.cfemedia.com.