Digital display series for machine setup and monitoring

Series of stand-alone digital display units are designed to connect directly to rotary encoders, inclinometers, linear sensors, and provide a direct readout of position, rotational speed or angular displacement.
By Posital Fraba June 23, 2016

Series of stand-alone digital display units are designed to connect directly to IXARC rotary encoders, TILTIX inclinometers, LINARIX linear sensors and provide a direct readout of position, rotational speed or angular displacement. Courtesy: Posital

Posital’s series of stand-alone digital display units are designed to connect directly to rotary encoders, inclinometers, linear sensors, and provide a direct readout of position, rotational speed or angular displacement. Built-in output conversion (D/A or A/D) is also available, with one analog and up to four digital output channels. Teaming up a digital display with an encoder, inclinometer or linear sensor provides a measurement tool for on-site position or speed measurement. Compact size and sturdy construction allow these displays to be located close to the machinery where the sensors are mounted and allow to be used for machine setup tasks and monitoring machine status. Regardless of input type, the displays can be programmed to display angular position, linear position or rotational speed directly and to provide limit warnings or cam-follower functionality. Programming can be done through front-panel buttons or with a PC-based programming tool.

Posital Fraba 

www.posital.com

– Edited by CFE Media. See more Control Engineering process sensor and actuator products.