Digital thermometer for RTD sensors: Omega Engineering DTG-RTD100

Omega Engineering's new DTG-RTD100 Series of digital thermometers is designed for use with RTD sensors. Large backlit display has digits that can be read at 35 ft away.

February 26, 2010

Omega Engineering Digital Thermometer for RTD Sensors DTG-RTD100

Omega Engineering’s new DTG-RTD100 Series of digital thermometer is designed for use with RTD sensors. It has a large backlit display with 25 mm (1-in.) digits that can be read as far as 10.7 m (35 ft) away. Reading features include, process, Min, Max, Alarm condition and battery status. An additional analog output signal is standard on all models. The rugged, splash proof, 316 Stainless Steel enclosure is designed specifically for wash down, sanitary or marine applications. Models are available with or without integral standard or sanitary sensors. Low power operation and sleep mode provides long battery life. Software and a USB cable is included that allows for easy setup and calibration via your computer. The Wireless Transmitter Option sends readings to remote locations and allows for PC-based chart recording and data logging. This proprietary product, designed and manufactured by Omega Engineering, is also CE compliant.

www.omega.com/Temperature/pdf/DTG-RTD100.pdf
Related reading from Control Engineering :

– Challenges of Temperature Sensing ;
– Contact Sensors: The Business End of Temperature Measurement ; and
– Sensors Product Channel at Control Engineering .
– Edited by Mark T. Hoske, editor in chief, Control Engineering , www.controleng.com.