DIN-rail-mount power supply module

DIN-rail-mount power supply module can connect two power supplies in 1+1 redundancy. DLP-PU series is applicable to process control and critical monitoring equipment where down-time would cause extensive and costly manufacturing delay. Module accepts up to two 20-Amp inputs rated between 21 V and 28 V, and contains o-ring diodes to isolate the effects of a faulty power supply on the system bus. LEDs indicate input status. Status of each output can be moni-tored using the power supply’s normally open or normally closed relay contacts; a fault is indicated if the input falls below 19.2 V or rises above 20 V.

www.lambdapower.com

Lambda

Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our WTWH Media editorial team and getting the recognition you and your company deserve. Click here to start this process.