EC: IndraControl L85 CNC Controller with Multi-core Processor
Enhancing productivity while reducing energy consumption, two key CNC operators requirements fully served by the advanced IndraControl L85 CNC controller. The IndraControl L85 is equipped with 16 MB SRAM and its multi-core processor has two 1.2 GHz CPU. The IndraControl L 85 multi-core processor was designed especially for machines with many axes and complex machining production processes that utilize multiple production technologies in a single work piece clamping.
Intelligent distribution of control sequences to the multi-core processor architecture delivers the added performance necessary to execute programs even faster. The control system reaches a CNC interpolation time that ranges from 0.25 ms to 1 ms, which decreases auxiliary process times and enhances productivity. The IndraControl L85 controller has been designed to run the Rexroth IndraMotion MTX CNC advanced solution with integrated IEC 61131 PLC. The design of the IndraMotion MTX Runtime-system allows the execution of NC- and PLC-tasks in parallel, each on its own core of the processor — enabling the performance of both systems (NC and PLC) to more than double.
The IndraControl L65 is equipped with an Ethernet field bus interface for multi-protocol operation, so manufacturers can choose between Profinet and Ethernet/IP. Depending on the specific system configuration, Sercos III, Profibus, Profinet, or EtherNet/IP can be configured to exchange data on the sensor-actuator level. Drive level communication is via Sercos III interface with Ethernet; so operators can control electrical and hydraulic motion with I/O and pneumatics, tightly synchronized with the interpolation update rate on a single bus.
The IndraMotion MTX platform also offers an optional energy monitoring module created to take advantage of the IndraControl L85’s power. Operators can document the energy consumption of drive axes or ancillary units, even measure energy consumption per work piece.