Robotics

Electronic glove gives robots a sense of touch

Researchers have developed an electronic glove with sensors that mimic human skin, helping robotic hands achieve some of the manual dexterity humans enjoy. See video.
By Tom Abate December 8, 2018
Courtesy: Bao Lab

Stanford engineers have developed an electronic glove containing sensors that could one day give robotic hands the sort of dexterity that humans take for granted. Chemical engineer Zhenan Bao and her team have demonstrated the sensors work well enough to allow a robotic hand to touch a delicate berry and handle a ping-pong ball without squashing them.

“This technology puts us on a path to one day giving robots the sort of sensing capabilities found in human skin,” Bao said.

Bao said the sensors in the glove’s fingertips simultaneously measure the intensity and direction of pressure. These two qualities are essential to achieving manual dexterity. The researchers must still perfect the technology to automatically control these sensors. When they do, however, a robot wearing the glove could have the dexterity to hold an egg between thumb and forefinger without smashing it or letting it slip.

Electronics imitating life

The electronic glove imitates the way layers of human skin work together to give our hands their extraordinary sensitivity.

Our outer layer of skin is imbued with sensors to detect pressure, heat and other stimuli. Our fingers and palms are particularly rich in touch sensors. These sensors work in conjunction with a sublayer of skin called the spinosum, which is a bumpy microscopic terrain of hills and valleys.

That bumpiness is critical. As our finger touches an object, the outer layer of skin moves closer to the spinosum. A light touch is felt mainly by sensors close to the hilltops. More intense pressure forces the outer skin down into the valleys of the spinosum, triggering more intense touch sensations.

Stanford University researchers have developed technology that makes it possible for robots to touch a delicate berry or handle a pingpong ball without squashing them. Courtesy: Bao Lab

Stanford University researchers have developed technology that makes it possible for robots to touch a delicate berry or handle a pingpong ball without squashing them. Courtesy: Bao Lab

Measuring the intensity of pressure is only part of what the spinosum enables. This bumpy sublayer also helps reveal the direction of pressure, or shear force. A finger pressing north for instance, creates strong signals on the southern slopes of those microscopic hills. This ability to sense shear force is part of what helps us gently but firmly hold an egg between thumb and forefinger.

Postdoctoral scholar Clementine Boutry and master’s student Marc Negre led the development of the electronic sensors that mimic this human mechanism. Each sensor on the fingertip of the robotic glove is made of three flexible layers that work in concert. The top and bottom layers are electrically active. The researchers laid a grid of electrical lines on each of the two facing surfaces, like rows in a field, and turned these rows perpendicular to each other to create a dense array of small sensing pixels. They also made the bottom layer bumpy like the spinosum.

The rubber insulator in the middle keeps the top and bottom layers of electrodes apart. That separation was critical because electrodes that are close without touching can store electrical energy. As the robotic finger pressed down, squeezing the upper electrodes closer to the bottom, the stored energy increased. The hills and valleys of the bottom layer provided a way to map the intensity and direction of pressure to specific points on the perpendicular grids, much like human skin.

Robots with a delicate touch

To test their technology the researchers placed their three-layered sensors on the fingers of a rubber glove, and put the glove on a robotic hand. Eventually the goal is to embed sensors directly into a skin-like covering for robotic hands. In one experiment, they programmed the glove-wearing robotic hand to touch a berry without damaging it. They also programmed the gloved hand to lift and move a ping-pong ball without crushing it by using the sensor to detect the appropriate shear force to grasp the ball without dropping it.

Bao said that with proper programming, a robotic hand wearing the current touch-sensing glove could perform a repetitive task such as lifting eggs off a conveyor belt and placing them into cartons. The technology could also have applications in robot-assisted surgery, where precise touch control is essential. Bao’s goal is to develop an advanced version of the glove that automatically applies the right amount of force to handle an object safely without prior programming.

“We can program a robotic hand to touch a raspberry without crushing it, but we’re a long way from being able to touch and detect that it is raspberry and enable the robot to pick it up,” she said.

Tom Abate, Stanford University. Edited by Chris Vavra, production editor, Control Engineering, CFE Media, cvavra@cfemedia.com.

Want this article on your website? Click here to sign up for a free account in ContentStream® and make that happen.


Tom Abate
Author Bio: Stanford University