Encapsulated dc-dc converters with chassisor DIN rail mounting
XP Power’s DTE series of fully encapsulated single output dc-dc converters is comprised of three input voltage range models offering 20 (DTE20), 40 (DTE40) and 60 W (DTE60) output power. The units are available in either a chassis mount or a DIN rail format, offering flexibility to the designer of the end-product. The fully encapsulated package also helps protect the converter from environmental factors often found in industrial applications in addition to aiding heat dissipation. These highly efficient converters, with model-dependent typical efficiency in the range 89 to 92%, run cooler and consume less power compared to other less efficient converters available in the market.
Two 4:1 input voltage range options are based around nominal 24 and 48 Vdc. Tightly regulated single output voltage options of 5.1, 12, 24 or 48 Vdc are available across the range, and isolation is rated at 2500 Vdc for 60 seconds. The DTE series can accommodate a wide range of operating temperatures across the extended industrial range from -40 to 85 C. Protection features such as short circuit, output overload, input under voltage lock-out and output over voltage and a remote on/off capability are standard across the range. Front mounted input and output screw terminal connections provide ease of installation.
– Edited by CFE Media. See more Control Engineering energy and power products.