EtherCAT IO controller for automation systems

Galil Motion Control's RIO-574x0 EtherCAT slave I/O controller is packed with digital and analog I/O to be used remotely and can be used with any generic EtherCAT master controller.
By Galil Motion Control December 12, 2015

Galil Motion Control's RIO-574x0 EtherCAT slave I/O controller is packed with digital and analog I/O to be used remotely and can be used with any generic EtherCAT master controller. Courtesy: Galil Motion ControlGalil Motion Control’s RIO-574×0 EtherCAT slave I/O controller is packed with digital and analog I/O to be used remotely in an EtherCAT automation system. The RIO-574×0 can be used with any generic EtherCAT master and is also designed to integrate into an EtherCAT system with Galil’s DMC-500×0 EtherCAT master. All RIO-574×0 controllers have 16 opto-isolated digital inputs and 16 high-power opto-isolated digital outputs. The RIO-57420 also includes eight analog inputs (4 to 20mA option available) and eight analog outputs, both configurable in the ranges of 0 to 5V, 0 to 10V, and ±5 or ±10V. All I/O are accessible via screw terminals and LED indicators are provided for all digital I/O points. 

Galil Motion Control

www.galilmc.com 

– Edited by CFE Media. See more Control Engineering industrial network products.