EtherNet/IP and Profinet-enabled Ethernet switches

The EDS-405A/408A-EIP and EDS-405A/408A-PN Ethernet switches by Moxa are designed to integrate legacy networks and feature management functions to support most applications that require an Ethernet switch.

August 15, 2013

Moxa’s EDS-405A/408A-EIP and EDS-405A/408A-PN switches are designed to integrating legacy networks, eliminating the need for additional configurations and modifications, and reducing deployment time. With EtherNet/IP embedded, the EDS-405A/408A-EIP switches are visible with custom faceplates in FactoryTalk View industrial management software, for greater operational and network visibility in factory automation HMIs. AOIs and EDS Files are available for all Moxa switch models to ensure a truly integrated switch installation. They feature ready-to-use Turbo Ring and Turbo Chain network redundancy technologies, which allow fast network recovery if a connection failure occurs.

Moxa EDS-405A/408A-EIP and EDS-405A/408A-PN switches are available in 5- or 8-port DIN-rail mount designs. Both provide rugged performance in the harsh environments often found at the edge of an industrial network. They also support a variety of useful management functions to accommodate most applications that require an Ethernet switch, such as IGMP snooping, IEEE 802.1Q VLAN, QoS, port mirroring, SNMP, bandwidth management, and warning by email or relay.

With embedded Profinet, the EDS-405A/408A-PN switches can be easily integrated into the Siemens Simatic Step 7 engineering tool. It is more convenient for automation engineers to configure through Step 7 and monitor with automation HMIs. GSD files (which also includes a faceplate) are available for all Moxa switch models to ensure a truly integrated switch installation. 

Moxa Americas Inc.

www.moxa.com 

– See more Control Engineering Ethernet products.