Front-end ac/dc power supply for power systems

CUI's PFR-2100 series offer a hot-swap blind-docking capability implemented through the use of a single connector for use in data center high voltage dc bus power systems, broadcast amplifiers, and other applications.
By CUI Inc. February 24, 2016

PFR-2100 series offer a hot-swap blind-docking capability implemented through the use of a single connector for use in data center high voltage dc bus power systems, broadcast amplifiers, and other applications. Courtesy: CUI Inc.CUI’s PFR-2100 series 2000 W front-end ac/dc power supply, is a blind-mate rectifier with a programmable output voltage range of 100 to 410 Vdc. Features include a hot-swap blind-docking capability implemented through the use of a single connector that integrates ac, dc and I/O signals. The series is suited for use in data center high voltage dc bus power systems, broadcast amplifiers, and EV battery charging systems. The programmable dc output voltage delivers a constant current up to 5.125 A with droop current sharing for paralleling up to 12 units. Additional features include power factor correction, remote on/off control, power good signal and front panel LED indicators. The PFR-2100 series complies with all applicable EMC requirements to accommodate worldwide applications and offers 60950-1 safety approvals.

CUI Inc.

www.cui.com

– Edited by CFE Media. See more Control Engineering energy and power products.