Machine safety and degrading component reliability
Is your machine downtime sometimes a surprise? Did a component in a safety circuit fail because it simply wore out and nobody knew it was about to fail? Well, maybe help has just arrived. Has anyone heard about EN ISO 13849-1; 2008?
This new standard (Safety of machinery, Safety-related parts of control systems) has arrived and the Machinery Directive in Europe has established its effective date as Jan. 1, 2012. Since the US is part of the ISO (International Standards Organization) many companies in the US are making plans to or have already adopted this new standard. In my opinion, 13849-1 improves machine safety because it moves machine safety from qualitative Categories to quantitative Performance levels. Compliance requirements in this new standard will now address all of the components in a safety circuit while determining that circuit’s Performance Level. As such, the expected life of a component is determined and documented relative to its expected number of cycles during machine operation. Therefore, the weak links can be identified and flagged early on during the design stage. This is particularly important for those components that are electro/mechanical, such as contactors or safety relays, and have moving parts or points that wear out over time. This wearing out over time is what many people refer to as “degrading component reliability”.
OK, great! Does anyone have an idea with this information how to reduce the surprise downtime (and possible hazard) related to this type of component failure?
4 ways to reduce surprise downtime
Several thoughts I have are as follows:
1.) Identify and document these components in your risk assessment for the machine.
2.) Add these components to your preventive maintenance plan.
3.) Plan for routine machine maintenance to replace these components before their expected failure.
4.) Update your risk assessment for the machine.
I have barely touched on the comprehensive approach for Functional Safety addressed by EN ISO 13849-1; 2008. Several companies and consultants offer two and three day classes on the new compliance requirements embedded in this new standard. In my opinion, to fully understand these compliance requirements you should consider contacting these sources and consider enrolling in one of their classes.
Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don’t see a comments box, then scroll down: Machine Safety & Degrading Component Reliability.
Did you see the Safety Integration Webcast?
Contact: www.jbtitus.com for “Solutions for Machine Safety”.