Miniature optical encoders for industrial automation applications

US Digital has added 400 and 500 cycles per revolution (CPR) resolutions to its existing E4T line of miniature optical encoders, which are designed for robotics, medical and other industrial automation applications.
By US Digital November 22, 2016

US Digital has added 400 and 500 cycles per revolution (CPR) resolutions to its existing E4T line of miniature optical encoders, which are designed for robotics, medical and other industrial automation applications. Courtesy: US DigitalUS Digital has added 400 and 500 cycles per revolution (CPR) resolutions to its existing E4T line of miniature optical encoders. The encoders are designed for robotics, medical and other industrial automation applications. The E4Ts deliver position and velocity feedback, while fitting National Electrical Manufacturers Association (NEMA) motors as small as size eight. The 400 and 500 CPR resolutions support applications requiring up to 2000 pulses per revolution. The encoders are available in single-ended and differential signal outputs for applications where noise immunity is critical. 288 different configurations are available including single and different output. It has a simple assembly process, four-piece construction, and push-on hub disk design and a 100 kHz frequency response. 

US Digital

www.usdigital.com 

– Edited by CFE Media. See more Control Engineering CNC and motion control products.