Pressure transmitter series for hazardous locations

Omega's PX51-IS/PXM51-IS Series of pressure transmitters are designed, tested, and FM certified for hazardous locations and is available in gage, absolute, and sealed gage models with a wide selection of outputs as well as dual fitting.
By Omega Engineering October 22, 2015

Omega's PX51-IS/PXM51-IS Series of pressure transmitters are designed, tested, and FM certified for hazardous locations and is available in gage, absolute, and sealed gage models with a wide selection of outputs as well as dual fitting. Courtesy: Omega EnOmega’s PX51-IS/PXM51-IS Series of pressure transmitters are designed, tested, and FM certified for hazardous locations. These transmitters offer an all stainless steel construction and rugged thick film sensing element, suitable for the harshest environments. The PX51-IS/PXM51-IS is available in gage, absolute, and sealed gage models with a wide selection of outputs as well as dual fitting. The list of locations requiring intrinsically safe devices is extensive. Most process control applications in industries as diverse as oil and gas production, chemical refineries, power generation, anywhere with airborne dust, such as silos, should use FM approved instrumentation.

Omega Engineering

www.omega.com 

– Edited by CFE Media. See more Control Engineering process sensor and actuator products.