Rotary stages for machining applications

Electromate's Bell Everman ServoBelt Rotary Stages are designed for medium-duty rotary motion jobs such as driving carousel tables on packaging and assembly machines and providing fourth-axis rotary motion for laser cutting and mini CNC machines.
By Electromate Bell Everman October 4, 2016

Electromate's Bell Everman ServoBelt Rotary Stages are designed for medium-duty rotary motion jobs such as driving carousel tables on packaging and assembly machines and providing fourth-axis rotary motion for laser cutting and mini CNC machines. Courtesy

Electromate’s Bell Everman ServoBelt Rotary Stages are compact rotary stages that offer strong through hole size and speed. ServoBelt Rotary stages offer two different through hole configurations. ServoBelt Rotary are designed for medium-duty rotary motion jobs such as driving carousel tables on packaging and assembly machines and providing fourth-axis rotary motion for laser cutting and mini CNC machines. Available with 50-, 100- or 200-mm center openings, the through hole stages accommodate large bundles of power, signal and pneumatic conductors. They also make it easy to integrate laser and optical systems. Standard-sized models with 16- or 25-mm through holes offer a more economical choice when fewer utilities need to pass through the center of the stage. Designed for NEMA 23 and 34 motors, the ServoBelt rotary stages offer speeds up to 1,000 rpm, continuous torque to 6.6 N-m and resolution down to 0.16 arc-sec with Renishaw ring encoders or tape scales for partial rotation. ServoBelt Rotary stages support both continuous rotation and variable indexing applications. They also incorporate large full duplex, angular contact bearings, imparting moment and load capacities far in excess of its usual application requirements.

Electromate Bell Everman

https://www.electromate.com/bell-everman.html 

– Edited by CFE Media. See more Control Engineering CNC and motion control products.