Safer nuclear fusion used for energy generation
Nuclear fusion for the controlled and regular generation of electric power by converting hydrogen into helium and reproducing on a small scale what actually happens in our sun is one of the top technological promises for the future and researchers are looking to produce net energy through a tokamak.
Nuclear fusion for the controlled and regular generation of electric power by converting hydrogen into helium and reproducing on a small scale what actually happens in our sun is one of the top technological promises for the future.
Designed to reach parameters beyond the ones previously obtained in laboratory experiments, the reactor prototype called ITER (the Latin word for "the way") is presently under construction in southern France. Its design capacity is for 500 MW, and the plan is to go live in 2025. The members of the ITER consortium are China, the European Union, India, Japan, Russia, South Korea, and the United States. The cost of the megaproject is expected to surpass $24.8 billion.
ITER, however, will not provide electricity to the grid, but it will be the first tokamak to produce net energy. It will enable scientists to learn more about handling multiple technical complexities of nuclear fusion, paving the way for machines that do indeed use it to supply electricity to the grid. The term tokamak comes from the Russian acronym for a toroidal chamber with magnetic coils.
For this plan to succeed, however, it will be crucial to ensure the nuclear fusion process can become self-sustaining and to prevent losses of energy via electromagnetic radiation and of alpha particles—the atomic nuclei of helium made up of two protons and two neutrons—as these losses would allow the reactor to cool. Experimental results observed during the past 20 years have shown the way in which fast ions (including alpha particles) are ejected from the plasma varies greatly from one tokamak to another. Until recently, no one understood which experimental conditions determined this behavior.
The problem is now a bit clearer through the work of Vinícius Njaim Duarte, a Brazilian researcher who recently earned his PhD with support from the São Paulo Research Foundation. Duarte is currently engaged in postdoctoral research at the Princeton Plasma Physics Laboratory (PPPL) in the US.
Duarte is the lead author of the article "Theory and observation of the onset of nonlinear structures due to eigenmode destabilization by fast ions in tokamaks."
Duarte’s research drew so much attention that the largest U.S. tokamak, DIII-D, developed and operated by General Atomics in San Diego, California, dedicated experiments were conducted to test the model he proposed. The results confirmed the model’s predictions.
"Electromagnetic waves excited by fast particles in tokamaks can display sudden variations in frequency, known as chirping in the jargon. No one understood why this happened on some machines and not in others. Using complex numerical modeling and experimental data, Duarte showed that whether chirping occurs or not—and hence the nature of particle and energy losses – depends on the level of turbulence in the plasma confined in the tokamak, where nuclear fusion reactions take place. Chirping occurs if it isn’t highly turbulent. With severe turbulence, there’s no chirping," said physicist Ricardo Magnus Osório Galvão, now director of Brazil’s National Space Research Institute (INPE) and Duarte’s former PhD supervisor at the University of São Paulo’s Physics Institute (IF-USP).
To make the import of this discovery comprehensible, a number of points must be explained.
Fusion not fission
First, it bears recalling the process in question is nuclear fusion—not nuclear fission, the process used in the world’s existing nuclear power plants. In fission, the atomic nuclei of heavy elements, such as uranium 235, for example, split into nuclei of lighter elements—krypton and barium in this case. This fission releases energy, electromagnetic radiation, and neutrons that in turn split in a chain reaction that keeps the process going.
Nuclear fusion works differently. In this process, the atomic nuclei of lighter elements, such as the hydrogen isotopes deuterium (one proton and one neutron) and tritium (one proton and two neutrons), fuse to form nuclei of heavier elements—in this case, helium (two protons and two neutrons)—and release energy.
"For nuclear fusion to be possible, it’s necessary to overcome the electrostatic repulsion between positive ions," Galvão said. "This only happens if the ionized gas [plasma] formed by the nuclei of the light elements is heated to extremely high temperatures, of the order of tens to hundreds of millions of degrees Celsius."
In ITER, for example, 840 cubic meters of plasma will be heated to 150 million degrees Celsius, over ten times the temperature of the Sun’s core. "At that kind of temperature, you reach energy breakeven: the energy released by the fusion reactions is sufficient to equal the energy required to heat the plasma," Galvão said.
The process takes place inside the toroidal chamber of a tokamak, a device invented in the 1950s by Soviet physicists Igor Yevgenyevich Tamm and Andrei Sakharov, who were inspired by an original idea of their colleague Oleg Lavrentiev. A torus is shaped like a doughnut or an inner tube. The solid contained by the surface is known as a toroid.
Starts with vacuum
The nuclear fusion process develops as follows. A vacuum is produced in the chamber, which is then filled with gas. An electric discharge ionizes the gas, which is heated by high-frequency radio waves.
An electrical field induced in the toroidal chamber subjects the gas to an extremely intense current of order of 1 million amperes in the case of DIII-D, which heats the gas even further via the Joule effect. Still more energy is injected by electromagnetic waves until the temperature required to trigger nuclear fusion is reached. Even a small tokamak, such as the one installed at the University of São Paulo, reaches temperatures on the order of millions degrees.
"At these extremely high temperatures, the ions vibrate so strongly that they collide and overcome electrostatic repulsion," Galvão said. "A powerful magnetic field confines the plasma flow and keeps it away from the vessel’s walls. The highly energized alpha particles [helium nuclei] collide with other particles in the plasma, keeping it hot and sustaining the fusion reactions."
An analogy suggested by Galvão would be a bonfire made with damp wood, which will not catch fire easily at first but which flares up eventually after a certain temperature is reached, and the steadily more stable combustion produces enough energy to overcome the humidity. In the case of a plasma, it is said to reach the ignition point when alpha particles begin consistently feeding back into the process.
Among fusion’s many advantages over fission is fusion involves a self-control mechanism: Once the ignition point is reached, if this temperature level is significantly exceeded—if the plasma overheats—the reaction automatically slows down. Thus, reactor meltdown, one of the most dangerous complications of accidents in power plants that use nuclear fission, could not happen in a nuclear fusion plant.
The problem is resonant interaction between alpha particles and waves present in the plasma can excite electromagnetic oscillations or even lead to the ejection of alpha particles. This can cause energy loss, plasma cooling and possible interruption of nuclear fusion. Understanding the causes of this problem and the factors that can prevent it is fundamental to ensuring the sustainability of the process and the use of nuclear fusion as a viable source of electricity.
"What Duarte found is this outcome happens in a self-organized manner, with the production of chirping, if the plasma is not very turbulent. If turbulence is high, however, it doesn’t," Galvão said.
The crux of the problem is that in a highly turbulent fluid, there is no preferential direction, Galvão said, offering another analogy to help illustrate his meaning.
"When you heat water slowly, you create a convection cell in the container. Hot water rises, and cold water sinks. This continues until all the water reaches boiling point," he said. "The medium then becomes turbulent, the convection cell is destroyed, and the energy spreads indiscriminately in all directions. This also happens in a magnetically confined plasma. Its occurrence prevents the creation of a self-organized system that sustains an undesirable associated electromagnetic wave. There isn’t enough coherence for waves to be generated. So, the loss of energy that would end the fusion process doesn’t occur."
Gregory Hale is the editor and founder of Industrial Safety and Security Source (ISSSource.com), a news and information Website covering safety and security issues in the manufacturing automation sector. This content originally appeared on ISSSource.com. ISSSource is a CFE Media content partner. Edited by Chris Vavra, production editor, CFE Media, firstname.lastname@example.org.
See related stories from ISSSource linked below.
Original content can be found at www.isssource.com.