Stand-alone stepper drives operate on 220 V ac
Watsonville, CA— Applied Motion Products’ STAC6-Si high performance stepper drives are available for 220 V ac operation. These drives are programmable for stand-alone operation with Si Programmer Microsoft Windows-based software with integrated tuning. A graphical point-and-click format combines motion, I/O and operator interface functionality for simple machine sequencing. As a result, the drives easily integrate on a machine with other devices, such as sensors and PLCs.
|AMP offers STAC6-Si high-performance stepper drives.|
The drives feature current output from 0.5 – 3.2 A with 220 V ac input, and provide software selectable resolutions from 200 to 51,200 steps/rev at speeds up to 50 rps. Self-test and auto setup features measure and configure motor parameters automatically, while anti-resonance technology eliminates midrange instability for higher motor speeds and fuller use of available torque. Command signal smoothing reduces extraneous system resonances for smoother motor performance and reduced wear on mechanical components. Torque ripple smoothing adjusts the current waveform to reduce low speed torque ripple for smooth motion at low motor speeds. Additionally, micro-step emulation provides smooth motion for systems that require low step resolutions, such as retrofit systems with controller resolution that is fixed at a low value and cannot easily be changed.
—Edited by C.G. Masi , senior editor