Top 5 Control Engineering articles, May 19-25
A few basic differences between control engineers and others in the plant can hinder progress toward optimization. Start a conversation to improve communications and controls. See examples and career advice. Send a link to these seven things other people should know about control engineers, so they understand.
Proportional-integral-derivative controllers may be ubiquitous, but they’re not perfect.
Clemson University created what it calls the world’s largest 15-megawatt (MW) Wind Turbine Drivetrain Test facility to create new technologies for the energy market. The facility, which opened November 2013, uses National Instruments (NI) integrated hardware and software tools.
Technology Update: Industrial facilities should include a system evaluation, including a harmonic distortion analysis, while planning facility construction or expansion. Vendors of nonlinear loads, such as variable frequency drives, can provide services and recommend equipment that will reduce harmonics to comply with IEEE 519.
Inside Machines: Motorcar Parts of America, an autoparts rebuilder, decided to design and build a new testing system in house using a programmable automation controller (PAC) and human machine interface (HMI). An auto parts rebuilder used off-the-shelf automation components to test remanufactured alternators quickly and efficiently.
The list was developed using CFE Media’s web analytics for stories viewed on controleng.com, May 19-25, for articles published within the last two months.
– Chris Vavra, content specialist, CFE Media, email@example.com.