Wireless: Initial focus is WirelessHART, says P+F
Initial wireless focus for Pepperl+Fuchs is WirelessHART, though P+F also is open to ISA100.
|Pepperl+Fuchs plans to offer WirelessHART adapters for field devices. P+F explained recently which process control applications are OK for wireless .
Initial wireless focus for Pepperl+Fuchs is WirelessHART.
Robert Schosker, product manager, at Pepperl+Fuchs, told Control Engineering that Pepperl+Fuchs is open to both the ISA100 set of standards and WirelessHART, though initial focus has been on WirelessHART because it was available first and has a large installed base through the wired HART protocol.
A lot of HART for wireless
Schosker says, "Wireless HART is very significant to users. Nearly 35% of the 24 million field devices installed worldwide speak HART, so with WirelessHART it is just adding another physical layer.
"All other tolls, principles, etc. are the same, and host integration is the same. Users don’t have to deal with new infrastructure, but instead are just extending it," Schosker says.
P+F has two WirelessHART products available.
See also in Control Engineering , System Integration: Wireless Standards .
– Mark T. Hoske, editor in chief, Control Engineering , www.controleng.com