Festo

latest from Festo

Automation, Controls

A century in automation: new leadership and a technology showcase

Bionic robots developed and modeled after fish, spiders, and bats

Festo's Multi-Carrier System is designed to enable customization of batch sizes and embodies Industrie 4.0 manufacturing concepts of modularity, communications, and diagnostics. Courtesy: Festo

Industrial Networking

Carrier system for customized batch sizes

Festo’s pneumatic semi-rotary vane drive and matched contactless position sensor feature sealed housing. Courtesy: Festo

Discrete Manufacturing

Pneumatic semi-rotary vane drive with sealed housing

Festo's SBSI series of low cost vision sensors are designed for code reading and inspection and is designed to make it easy for original equipment manufacturers (OEMs) to incorporate the power of vision sensing into their solutions. Courtesy: Festo

Vision sensors for code reading and inspection applications

Festo's Multi-Carrier System is a transport system designed for companies offering custom products or both standard and custom products packaged on the same line and has features relevant to Industry 4.0 such as an electromechanical design and OPC-UA. Cou

PLM, Control Design

Transport system for machine OEM applications

Festo's DSBG line of ISO 15552 large diameter tie rod pneumatic cylinders are available in 160 and 200 mm sizes and are designed for heavy duty applications such as the automotive, mining, and water treatment industries. Courtesy: Festo

Discrete Manufacturing

Pneumatic cylinder series for heavy duty applications

Festo's VS series of piston-spool solenoid and pneumatic valves and valve manifolds are designed ideal for simple clamping and locking operations in semiautomatic assembly as well as explosive environments. Courtesy: Festo

Solenoid and pneumatic valve series for clamping and locking operations

Festo's SDAT-MHS T-slot programmable position transmitter are designed to offer OEMs a solution for sensing a pneumatic cylinder's position that can be transmitted to a PLC with a repetition accuracy of 0.1mm. Courtesy: Festo

Mechatronics and Motion Control

Programmable position transmitter for linear actuators

Festo's DDLI servo-pneumatic actuator delivers precise dynamic movement of large loads for OEMs and can regulate feed forces on the fly. Courtesy: Festo

Mechatronics and Motion Control

Pneumatic actuator for servo positioning and force control

The Festo motor, MTR-ECI, integrates a servo motor, gearbox, power electronics, controller, and EtherNet/IP, an Ethernet protocol. Courtesy: Control Engineering, Mark T. Hoske

Mechatronics and Motion Control

Pneumatics, motor and drive units for food industry on display

Giant dragonflies, 290 million years ago, had a similar wingspan, just over 2 ft (63 cm). This Festo Bionic dragonfly was 90% 3D printed. It weighs about 6.2 oz (175 g) including 8 servo motors, one for flapping and one for direction on each of the four w

Giant dragonfly, jellyfish make waves

Hannover Messe: Festo robotics, valves, motion control, software