I/O Systems, I/O Modules
Understanding the terms and language for mobile electronic control systems is crucial. Highlighted below are key terms that users need to know.
Yaskawa's Sigma-7Siec is designed for automation applications that require the control of only one servo motor and offers an amplifier/controller combination.
Lenze's modular software, scalable hardware, and modern interfaces is designed to minimize engineering requirements and expedite machine motion control.
Safety — Process safety, intrinsic safety: ProSafe-RS is a safety instrumented system that is certified by TÜV Rheinland to meet Safety Integrity Level 3 specified in IEC61508 ed2.0. This is a Control Engineering 2017 Engineers’ Choice Awards Finalist.
Phoenix Contact's PT 2,5/S-Quattro four-position terminal blocks are designed to provide a high wiring density without sacrificing space across the DIN rail and also have a double function shaft for easy potential distribution with plug-in bridges and large-surface marking options.
The Allen-Bradley CompactLogix 5380 controller from Rockwell Automation is ideal for high-speed applications with up to 20 axes of motion and features a dual-configurable, 1-GB Ethernet port that supports device-level-ring (DLR) topologies or the use of multiple IP addresses.
Unitronics' UIS-WCB2 is an I/O module designed to offer a variety of I/O options in a single unit and features 10 digital inputs, two analog inputs, two thermocouple inputs, eight relay outputs, 10 transistor outputs, and two analog outputs.
GE’s FSTi-EP I/O device compatible with industrial Internet-enabled applications, features I/O slices that are 11.5 mm wide and has a response time reading up to 356 discrete I/O points in 20 microseconds.
Teledyne Dalsa’s TurboDrive is an 8k GigE vision line scan camera with CMOS sensors for variety of applications. It offers extended dynamic range for combining short and long exposure images to output images with high contrast in dark and bright areas.
Tianma NLT USA has six 5.7-in. TFT LCD modules, which are designed for industrial display applications and they have the same module outline and the same mounting hole positions.