Permanent magnet motor with integrated speed control electronics

CI Takiron's family of 12 mm OD micro slotless brushless permanent magnet (PM) motors have integrated speed control electronics and can be used in a wide range of applications such as battery-operated handheld power tools, miniature compressors, micropumps, and small robots.

By CI Takiron June 18, 2017

CI Takiron’s family of 12 mm OD micro slotless brushless permanent magnet (PM) motors are used in a wide range of applications such as battery-operated handheld power tools, miniature compressors, micropumps, and small robots. This 4-member motor family provides stall or peak torque values ranging from 0.88 mNm (0.125 oz-in) up to 1.14 mNm (0.161 oz-in). The C12C-XI-S and C12C-X2-S models use sleeve bearings and operate at 6480 and 7920 rpm, respectively. The ball bearing models, C12C-X2-S-B and C12C-X2-S, are used in applications that handle heavier application mechanical loads. All CI Takiron models have low current consumption (below 25 ma). The speed constant varies from 2.14 to 2.16 Krpm/volt for the C12C-XI models and 2.60 to 2.64 Krpm/volt for the C12C-X2 models. All four motors are energized at a low output of 3 volts dc. 

CI Takiron

www.takiron.co.jp/english 

– Edited by CFE Media. See more Control Engineering motor and drive products.