EC: NovaTorque Gen2.0 PremiumPlus+ ECPM Motors

Motion Control: NovaTorque's new motor is a radically innovative electric motor design that uses low-cost ferrite magnets to deliver the efficiency of rare-earth permanent magnet motors at a price competitive with standard induction motors. This is a Control Engineering 2013 Engineers' Choice finalist.

11/12/2012


NovaTorque's new motor is a radically innovative electric motor design that uses low-cost ferrite magnets to deliver the efficiency of rare-earth permanent magnet motors at a price competitive with standard induction motors. This is a Control Engineering 2013 Engineers' Choice finalist.NovaTorque’s Gen2.0 PremiumPlus+ Electronically Commutated Permanent Magnet (ECPM) motors use low-cost ferrite magnets in an innovative flux-focusing design to deliver the best of both worlds, the superior efficiency of rare-earth permanent magnet motors at a price that is competitive with induction motors. Driven by variable frequency drives, these motors boast motor-only rated point efficiencies of 93.0% and 92.0% for 3 hp and 5 hp versions respectively, far exceeding the levels achieved with induction motors. By comparison, 3 hp and 5 hp NEMA Premium induction motors, when driven by variable frequency drives, achieve a motor-only efficiency of between 88.5% and 90.0%.

NovaTorque’s PremiumPlus+ motors also maintain their high efficiency over a much wider speed and load range.  For example, in a variable speed, variable torque application such as a fan or pump, a 50% reduction in speed results in a 75.0% reduction in load. At that reduced load, NovaTorque motors will maintain efficiency of approximately 91%, whereas a NEMA Premium efficiency induction motor will have declined to 80%. The advantage is even more dramatic when compared to the current installed base of induction motors, where improvements ranging from 20% or more are achievable.

Importantly, due to its unique patented flux-focusing stator and rotor hub geometry, the NovaTorque motor produces this performance with an all-ferrite (versus rare earth) magnet design. The cost of rare earth (neodymium) magnet material, the basis of most conventional permanent magnet motors, has risen dramatically and is now more than 25 times the cost of ferrite. Further, supply of rare earth magnets, nearly sole-sourced out of China, is increasingly uncertain. Using ferrite magnets allows NovaTorque to price its motors comparable to induction motors. This means OEMs and HVAC systems builders can now economically deliver permanent magnet motor efficiency with their systems.

www.novatorque.com

http://novatorque.com/demonstration-video.html

NovaTorque Inc.



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me