Machine Safety: Are machine builders shipping unsafe machines?

Can a U.S. original equipment manufacturer (OEM) ship a machine without safety integrated into or included as part of the machine? Aren’t there regulations requiring machine manufacturers to provide machine guarding? An example of basic machine safety is an emergency stopping device, such as an e-stop.

12/24/2014


Can an original equipment manufacturer (OEM) in the U.S. really ship a machine without safety included or integrated into the machine? Aren’t there regulations requiring machine manufacturers or machine builders to provide machine guarding? All OEMs must include some basic machine safety on a machine when they sell that machine to a customer (end user) within the United States.

Machine safety compliance: U.S. vs. EuropeAn example of basic machine safety is an emergency stopping device such as an e-stop. However, an OEM has the flexibility to provide a main disconnecting device for performing an emergency stop function in some cases. This function and other machine specific safety-related functions are covered as requirements in some OSHA regulations as well as in some “B” and “C” level consensus standards for machine safety.

However, these requirements do not address all hazards associated with an installed machine for operators, maintenance, engineers or clean-up personnel and others operating within a manufacturing environment. Today, a risk assessment is required by regulation for installed machines to determine all hazards and remediation measures.

1. In the U.S. we have OSHA which was created in 1970 as a regulatory arm of the government to provide safety in the work place. OSHA regulations are specifically written to address employer provided safety. OSHA’s General Duty Clause specifically says:

Each employer --

(1)   shall furnish to each of his employees employment and a place of employment

which are free from recognized hazards that are causing or are likely to cause

death or serious physical harm to his employees;

(2)   shall comply with occupational safety and health standards promulgated under

this Act.

Therefore, to the amazement of many in an audience, I explain that in general an OSHA inspector will not examine a machine being built by an OEM. The OSHA inspector will inspect an OEM's work practices in manufacturing but that machine only will be subject to machine safety enforcement once it’s owned and installed for production by an employer (end user).

There are some levels of machine safety standards that are referenced by OSHA in addition to their regulations and by “reference” they are also enforceable by OSHA. Practically all OSHA enforcement for machine safety is, by default, directed at the end user employer.

2. Some levels of basic safety are required by OSHA regulations and by industry consensus standards. Some examples are:

(1)   1910.217 – Mechanical power presses, for various design and safety functions like slide braking, clutch and brake control, two hand control, etc.

(2)   ANSI B11.1; Safety Requirements for Mechanical Power Presses

(3)   NFPA 79; Electrical Standard for Industrial Machinery
    
The ANSI and NFPA standards include both basic machine safety standard requirements as well as additional (beyond OSHA) requirements. However (in my opinion), since an OEM is not an end user employer, the OEM may ship machines to end users without all of the eventually required safety measures installed.

I have seen this picture changing over the past 10 plus years in the consensus standards update cycles, which have been requiring more machine safety measures provided by OEMs. Yet, OSHA’s enforcement practice is still primarily focused on the end user.Has this presented you with any new perspectives about responsibility of machine safety in the U.S.? Do you have some specific topic or interest that we could cover in future machine safety blog posts? Add your comments or questions below.Related articles: Read other Control Engineering machine safety articles.Contact: www.jbtitus.com for “Solutions for Machine Safety.”

 



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
November 2018
Reliable wireless operations; PID tuning tips; Process control data quality; Cyber protection and integration
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
Material Handling
This article collection focuses on how modern supply chain must run at warp speed, and how the tools available—from conveyors and robots to automatic picking systems and digital orders—have evolved to keep pace with the speed of change.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me