Single-axis motion controller with Ethernet connectivity

Galil's DMC-30012 is a single-axis motion controller that and features an internal 800-Watt brushless sine drive and can operate stand-alone or can be networked to a PC via Ethernet.

By Galil Motion Control March 21, 2016

Galil’s DMC-30012 is a single-axis motion controller that uses a 32-bit RISC processor and features an internal 800-Watt brushless sine drive. The motion controller operates stand-alone or can be networked to a PC via Ethernet. Features include a single-axis motion controller with on-board 800 W brushless sinusoidal servo amplifier. It also has two daisy-chainable Ethernet 100 Base-T ports and one 115kbaud RS232 port. Ethernet supports multiple masters and slaves as well as TCP/IP, UDP and Modbus TCP protocol for communication with input/output (I/O) devices. Encoder feedback is up to 15 MHz and it has non-volatile memory for programs, variables and arrays. It can concurrently execute four programs and has optically isolated forward and reverse limit inputs. It also has two uncommitted analog inputs and one uncommitted analog output.

Galil Motion Control

Home | Galil 

– Edited by CFE Media. See more Control Engineering CNC and motion control products.